User manual BEHRINGER ACX1000

[. . . ] ACX1000 User's manual Version 1. 3 June 2006 ULTRACOUSTIC ULTRACOUSTIC ACX1000 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 5) Do not use this apparatus near water. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. [. . . ] Use this switch to eliminate feedback problems. The MASTER control determines the overall volume level of your ULTRACOUSTIC. The ULTRACOUSTIC features a limiter circuit in the master section. The LIM LED lights up as soon as the limiter is on. The AUX input on the rear of your ACX1000 can be muted with the MUTE switch. The AUX LEVEL control in the master section adjusts the volume level of the AUX signal (e. g. drum computer, playback) fed in via the AUX IN or TAPE IN jacks on the rear of the ULTRACOUSTIC. Your ACX1000 features an on-board effects module that produces 23 different types of effects comprising 99 effect variations plus associated program numbers. The DISPLAY reads the program number of the currently active preset. Use the table printed on the effects module to locate the various groups of effects and associated program numbers. "--" means that the effects module is disabled. When you press the POWER switch on the rear of the unit, the POWER LED lights up. Be sure to properly connect your ULTRACOUSTIC to the mains before (see chapter 3 "INSTALLATION"). Use the four PRESET buttons to assign an effects program to one of the PRESET buttons and recall it from there. To save a preset selected with the PROGRAM control, simply press one of the four PRESET buttons for about 2 seconds, until its LED lights up. To recall a stored preset, press the corresponding PRESET button. The mix of signals adjusted with the EFFECT control will of course be stored as well. To adjust the MIDI receive channel, press PRESET buttons #3 and #4. Then, select a MIDI channel with the PROGRAM control (1 through 16, "on" = Omni, "OF" = inactive). Finally, quit the menu by pressing either one of the PRESET buttons. Select one of 99 effect programs with the PROGRAM control. The INSTRUMENT CLIP LED lights up as soon as the effects module starts distorting. Reduce the input gain on the instrument channel. [. . . ] § 7 CLAIM FOR DAMAGES Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. In no event shall the liability of BEHRINGER exceed the invoiced value of the product. * Customers in the European Union please contact BEHRINGER Germany Support for further details. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. [. . . ]