User manual BEHRINGER BCD2000

[. . . ] B-CONTROL DEEJAY BCD2000 Users Manual Version 1. 0 June 2005 B-CONTROL DEEJAY BCD2000 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 5) Do not use this apparatus near water. [. . . ] Use the CUE button to set and select the cue points. Press the CUE button a little longer to delete the currently selected CUE point. How to use the CUE function is described in chapter 5. 2. Playback is started with the PLAY/PAUSE button. Press this button again to stop playback. Press the button once again to resume playback from the position where it stopped. 3. 2 The rear panel Fig. 3. 2: The rear-panel audio connectors of the BCD2000 MIC INPUT. The MIC IN connector is the balanced XLR input for your dynamic microphone. The analog input A (PHONO) is used for connecting a turntable. Connect the ground cable on your turntable to the GND screw on the BCD2000 housing. To connect a CD player or tape deck to this input, set the switch to LINE. Connect the MASTER OUTPUT to your power amplifier. It provides the main output signal, which can be adjusted with the MASTER control . CONTROL ELEMENTS AND CONNECTIONS 9 B-CONTROL DEEJAY BCD2000 5. OPERATION The operating concept of the B-DJ system has been designed so that you will understand it quickly and intuitively. All control elements are arranged in a way you probably know from DJ mixers or DJ CD players. The user interface (BCD2000 Blue Skin) is almost identical to the user interface of the BCD2000, so that you can control as many functions as possible from the B-CONTROL, thus knowing immediately where to do whatwithout having to touch your computer mouse. 5. 1 First steps Fig. 3. 3: POWER switch, mains and USB connectors The USB connector is used for connecting to a computer with a compatible USB port. The BCD2000 uses the USB connector to send and receive audio and control data. A standard power socket is provided for connection to the mains. A matching power cable is included with the unit. The POWER switch turns your BCD2000 on and off. [. . . ] s damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. [. . . ]