User manual BEHRINGER DX052

[. . . ] DX052 Users Manual Version 1. 0 March 2003 PRO MIXER ENGLISH PRO MIXER DX052 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 7) Do not block any ventilation openings. [. . . ] CONTROL ELEMENTS PRO MIXER DX052 crossfade setting is as it was before. Pressed upwards, the switch locks into the reversed position (HOLD). You determine the input signals with the PHONO/LINE/LINE switches. Phono is intended for connecting a turntable. Line must be selected for all other signal sources (e. Thanks to switch on the rear, the phono input can be switched to line level. Never connect devices with line level to the highly sensitive phono inputs!The output level of phono pick-up systems is measured in millivolts, whereas CD players and tape decks have levels measured in volts, i. e. the level from line signals is up to 100 times higher than that of the phono inputs. The integrated BPM counter is an extremely useful feature. It ensures smooth transition from one track to the next, making your session an absolute success. We strongly recommend the use of high-grade cables and connectors for the transmission of audio signals. Inferior quality materials cannot supply acceptable audio quality or corrosion protection. The PHONES OUT connector enables you to preview tracks (MONITOR signal) on your headphones. Your headphones should have a minimum impedance of 32 Ohms. 2. 5 XPQ 3D surround effect The XPQ 3D surround function is a built-in effect that puts the finishing touch to your music and turns every gig into a real experience. The widening of the stereo base makes for a livelier, more transparent sound. The XPQ SURROUND control determines the intensity of the XPQ 3D surround effect. 3. CONNECTIONS With the exception of the microphone and headphones connectors, all of the DX052s audio connections are located on the rear panel and supplied as RCA connectors. 2. 2 Microphone channel Select the volume of the microphone signal with the LEVEL control in the MIC section. There is a 2-band equalizer (HI and LOW) in the microphone section. This allows you to fine-tune your voice to adapt perfectly to your sound. The PAN(ORAMA) control determines the position of the microphone signal within the stereo image of the MASTER signal. 2. 3 MASTER and MONITOR section This is the MASTER level control to adjust the output volume at the MASTER output (see ). The XPQ SURROUND control determines the intensity of the XPQ 3D surround effect (see chapter 2. 5). [. . . ] This also applies to defects caused by normal wear and tear, in particular, of faders, potentiometers, keys/buttons and similar parts. Damages/defects caused by the following conditions are not covered by this warranty: s improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. s connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. s damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. [. . . ]