User manual BEHRINGER FL600

[. . . ] Turn up the DEPTH control to achieve a fuller and deeper effect sound. This control lets you choose between different flanger effect modes: TRG DWN: The modulation signal triggers a linearly falling wave envelope with a falling time determined by the SPEED control. TRG UP: The same as TRG DWN but with a linearly rising wave envelope. CHORUS: The signal is modulated by a wide-range, triangular wave with a large offset producing a chorus-like effect. [. . . ] In CHORUS, VINTAGE, SINE, SAW UP and SAW DOWN stereo modes, both channel signals are processed with inverted phase LFOs. In SAW UP and SAW DOWN mono modes, both delay lines are mixed to create a continuous rise/fall signal. Press the footswitch to activate/deactivate the effect. Depress the pedal (>2 s) to set the flanger's speed by tapping the pedal to the desired tempo. Depress the pedal once again (>2 s) to quit the set tempo function. Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit. FLANGER MACHINE FL600 The FL600 has no on/off switch. As soon as you insert the plug into the IN connector, the FL600 is on. When not using the FL600, remove the plug from the IN connector. The SERIAL NUMBER is located on the underside. In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS IN A Connector Impedance Impedance mono OUT A Connector Impedance Power supply 1/4" TS 500 k 250 k IN B Connector Impedance 1/4" TS 500 k Power connector Battery Power consumption Dimensions (H x W x D) Weight OUT B 1/4" TS Connector 1/4" TS 1 k Impedance 1 k 9 V_, 100 mA, regulated BEHRINGER PSU-SB U. S. A. /Canada 120 V~, 60 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Europe/U. K. /Australia 230 V~, 50 Hz Japan 100 V~, 50 ­ 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 60 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. [. . . ] The names of companies, institutions or publications pictured or mentioned and their respective logos are trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specification may vary slightly from product. [. . . ]