User manual BEHRINGER FM600

[. . . ] CONTROLS Top view The FILTER switch is used to select one of three filter types (BP=Band Pass, TF=Twin Filter band pass, LP=Low Pass), which deliver completely different sounds. Cut-off and center frequencies respond to the dynamics of your playing. The SENS knob determines the sensitivity of the filter and hence the level at which the filter frequency modulation starts to work. [. . . ] To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. It is operable as soon as you insert a plug into the IN connector. Disconnect the plug, if you don't use the FM600. In doing so, you can extend the life time of the battery. The SERIAL NUMBER is located at the underside. FILTER MACHINE FM600 In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS IN Connector Impedance OUT Connector Impedance Power supply BEHRINGER PSU-SB 1/4" TS 1 k 9 V_, 100 mA regulated USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50/60 Hz Europe/U. K. /Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Export model 120/230 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 60 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) 1/4" TS 500 k Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. SAFETY INSTRUCTIONS Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged. [. . . ] Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. © 2007 BEHRINGER International GmbH. [. . . ]