User manual BEHRINGER FX600

[. . . ] CONTROLS Top view The LEVEL control adjusts the output level. and The PAR 1 and 2 controls have different functions depending on the chosen effect. AY Chorus Flanger Phaser Delay Tremolo Pitch Shifter ApvQ6S py Effects speed Effects speed Effects speed Delay time Effects speed Detune (slight shifting for fatter sound) ApvQ6S!py Effects depth Effects depth Effects depth Delay feedback Shape (LFO waveform) Semi tone (pitch interval) The FX control lets you chose between six different modulation effects: CHORUS: This effect slightly detunes the original signal. A very pleasant detune effect is created in connection with the pitch variation. [. . . ] Use the footswitch to activate/deactivate the effect. Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if you want to achieve full stereo effect. Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit. + DIGITAL MULTI-FX FX600 The FX600 has no on/off switch. As soon as you insert the jack into the IN connector, the FX600 begins running. When not using the FX600, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom. For our current warranty terms, please refer to our website at http://www. behringer. com. SPECIFICATIONS Connector Impedance Impedance mono Connector Impedance Connector Impedance 1/4" TS 500 kW 250 kW 1/4" TS 500 kW 1/4" TS 1 kW 1/4" TS 1 kW 9V , 100 mA regulated BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50 Hz U. K. /Australia 240 V~, 50 Hz Europe 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 90 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) In B Out A Out B Connector Impedance Power supply Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. Do not use near water, or install near heat sources. Use only authorized attachments/accessories. [. . . ] Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. [. . . ]