User manual BEHRINGER GTX60

[. . . ] GTX60/GTX30 User Manual A50-99230-08002 GUITAR COMBO GUITAR COMBO GTX30/GTX60 Important Safety Instructions 1) Read these instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. Caution + To reduce the risk of electric shock, do not remove the top cover (or the rear section). + To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. [. . . ] The unit must always be connected to the mains outlet with a protective grounding connection. 2. 2. 1: GUITAR COMBO control elements (front panel) 4 Control elements GUITAR COMBO GTX30/GTX60 2. 1 Front panel {1} The INPUT socket is the 1/4" connector for your guitar. Please use a standard 1/4" guitar cable. + The headphones output signal can also be routed to a mixing console or other sound reinforcement system. To do so, connect the headphones output with the line input on the mixing console. Use a standard cable with 1/4" TS connectors. If hum problems occur, you may want to insert a DI box, such as the BEHRINGER ULTRA-DI GI100 or DI120. + At extremely high volume levels some headphones tend to produce distortion. Please turn the volume down until the distortion is no longer present. [19] Use the FOOTSWITCH jack to connect the 1/4" TRS plug of the footswitch supplied with the unit. The footswitch has three functions: to switch between the two channels, to turn the FX on and off, and to activate and deactivate the tuner (GTX60 only). [20] The POWER switch turns your GUITAR COMBO on and off. It should always be in the OFF position when connecting the unit to the mains. + Please note that switching the unit off does not mean that it is fully disconnected from the mains. To disconnect the unit from the mains entirely, pull out the mains connector. Before installation, please make sure that the mains connector has not been damaged. If you do not use the unit for an extended period of time, please disconnect it from the mains. 2. 1. 1 CLEAN channel {2} The CLEAN CHANNEL LED lights up when the channel is active. {3} The VOLUME control determines the volume of the CLEAN channel. {4} The BASS control in the EQ section boosts or cuts the bass frequencies on the CLEAN channel (GTX60 only). {5} The TREBLE control adjusts the treble frequencies on the CLEAN channel (GTX60 only). {6} Press the CHANNEL button to switch between the CLEAN and OVERDRIVE channels. The channel LED lights up when the channel is activated. [. . . ] Such costs will also be invoiced separately when the buyer has sent in a written repair order. § 6 Warranty transferability This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc. ) shall be entitled to give any warranty promise on behalf of BEHRINGER. § 7 Claim for damages Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. [. . . ]