User manual BEHRINGER LC2412

[. . . ] LC2412 Users Manual Version 1. 1 May 2004 EUROLIGHT ENGLISH EUROLIGHT LC2412 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 5) Do not use this apparatus near water. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. [. . . ] this time (CH FLASH key 4. 1. 3 Previewing and modifying memories To preview memories before fading them in, use the PREVIEW to deactivate the console output for this procedure. The key setup can only be observed on the control LEDs. The remaining functions of the EUROLIGHT LC2412 remain active. After you press the preview key, the display shows the selected memory bank at the top right side. Select the memory that you wish to control by using one of the FLASH keys. The memory is then displayed by means of control lights only. If you wish to modify the memory shown in preview mode, select the MODIFY function shown in the display by using the SOFT B key (see fig. 4. 2). 4. 1 Programming, recalling and altering memories (scenes) 4. 1. 1 Programming 1. Set up a stage design (scene) while in preset mode (Fader A PRESET section). To store a scene, you must first quit the preset mode. By using the UP/DOWN keys , you switch into the memory mode. The bank display indicates which storage bank is selected. Press the MEMORY key in the programming section. The shows the following text (an example): display Fig. 4. 2: Display Editing memory in preview mode You can implement the desired changes now by using the faders of the A PRESET section. To change the programmed settings of preset faders, you must first draw the fader to its original position. The channels not activated during the previous programming can be raised as usual. To save your settings, please select ENTER by using SOFT B. Either confirm the next memory or quit the preview mode by hitting the QUIT key . Otherwise, you can also program the memory anew, as described at the beginning of this chapter. Fig. 4. 1: Display Program memory The meaning behind the above line: the next step (select memory), location (memory slot number/storage bank). You have already selected a storage bank using the UP/DOWN keys (7), and now use the FLASH keys to select a location. [. . . ] BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, BEHRINGER will return the unit C. O. D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. [. . . ]