User manual BEHRINGER MS16

[. . . ] The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the unit. 11) Only use attachments/accessories specified by the manufacturer. [. . . ] Please turn the VOLUME CONTROL all the way to the left before powering up the unit. Please always pay keen attention to an appropriate volume level. Connect your headphones via the PHONES output (1/8" TRS) to monitor any of the input devices. When headphones are connected, the internal loudspeakers are automatically switched off. The POWER switch turns the unit on or off. The POWER switch should always be in the Off position when you are about to connect your unit to the mains. + Please note that the POWER switch does not disconnect the device from the mains. If the device is not in use for a long period of time, please disconnect it from the mains by unplugging the power cord from the power socket. The POWER LED lights up when power is switched on. INPUT 1 (1/8" TRS) allows you to connect audio equipment such as CD/MD players. 2. CONTROL ELEMENTS AND CONNECTIONS 5 MONITOR SPEAKERS MS16 Use INPUT 2 (RCA) to connect your soundcard, keyboard or expander. + You can play back various signals by using both stereo inputs simultaneously. Connect both speakers by using the speaker cable included in this package. As soon as both speakers are properly connected, they will function as a stereo speaker system. Insert the speaker cable from the SPEAKER TO LEFT connector. Before you connect the unit to the power source make sure that the power switch is turned off and the volume control is turned to the far left position to avoid any damage to speakers or any other device. Please take the time to fill in and return the warranty card within 14 days after the date of purchase, so as to benefit from our extended warranty. Or register online at (www. behringer. com). 3. WIRING AND APPLICATION EXAMPLE The MONITOR SPEAKERS MS16 are designed to accommodate a variety of different connector types for almost any situation you may encounter. You will find all audio inputs on the right speaker. The left speaker only has one audio input which is fed from the right speaker. First of all, you should connect the left to the right speaker by wiring the attached speaker cable from the right speakers SPEAKER TO LEFT connector to the SPEAKER FROM RIGHT connector of the left speaker. Fig. 3. 1: Wiring of left and right loudspeaker Connect your soundcards speaker outputs to the MS16 stereo input. Of course, you can also connect your keyboard or mixer to this input. [. . . ] § 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. * Customers in the European Union please contact BEHRINGER Germany Support for further details. The information contained in this sheet is subject to change without notice. [. . . ]