User manual BEHRINGER RM600

[. . . ] CONTROLS Top view The FAST control adjusts the rotating speed of the drum and the horn when FAST is activated via footswitch (see ). The range does not overlap with the SLOW control. The SLOW control adjusts the rotating speed of the drum and the horn when SLOW is activated via footswitch (see ). [. . . ] Use the 1/4" TS IN A and IN B connectors to plug in the instrument cables. The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors if you want to achieve full stereo rotary effect. Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. As soon as you insert a plug into one of the IN connectors, the RM600 begins running. When not using the RM600, remove the plugs from the IN connectors. The SERIAL NUMBER is located on the underside. ROTARY MACHINE RM600 In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS IN A IN B OUT A OUT B Power supply Connector: 1/4" TS Impedance: 500 k Connector: 1/4" TS Impedance: 500 k Connector: 1/4" TS Impedance: 1 k Connector: 1/4" TS Impedance: 1 k 9 V_, 100 mA regulated BEHRINGER PSU-SB USA/Canada 120 V~, 60 Hz Europe/U. K. /Australia 230 V~, 50 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Japan 100 V~, 50/60 Hz 2 mm DC jack, negative center 9 V type 6LR61 60 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. SAFETY INSTRUCTIONS Do not use near water, or install near heat sources. [. . . ] Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER logo and JUST LISTEN are trademarks of BEHRINGER. [. . . ]