User manual BEHRINGER S1530

[. . . ] EUROLIVE S1020/S1220/S1220F/S1520/S1530/S1800S User manual A50-73029-00001 EUROLIVE S1020/S1220/S1220F/S1520/S1530/S1800S Important Safety Instructions 1) Read these instructions. 5) Do not use this apparatus near water. + To reduce the risk of electric shock, do not remove the top cover (or the rear section). + To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. [. . . ] + The following instructions are intended to familiarize you with the specialized terminology used throughout this user manual in order for you to master all the functions. After having thoroughly read the user manual, store it in a safe place for future reference. 2. 1: Connection panel Two ¼" loudspeaker inputs are wired in parallel. You can optionally connect one of the connectors to the output on your power amp, and tap into the signal on the second connector in order to feed this signal into an additional loudspeaker. 2. Connections 1. 1 Before you get started 1. 1. 1 Shipment Your loudspeaker was carefully packed at the assembly plant to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage. + Damaged units should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery of the unit. Otherwise, all claims for replacement/repair may be rendered invalid. + Please always use the original packaging to avoid damage due to storage or shipping. + Never let unsupervised children play with the loudspeaker or its packaging. + Please dispose of all packaging materials in an environmentally friendly fashion. Fig. 2. 2: ¼" TS loudspeaker connector + ATTENTION: Never connect more than one power amp output to the loudspeaker system. This may permanently damage your setup. Information + The sound quality may diminish within the range of powerful broadcasting stations and high-frequency sources. Increase the distance between the transmitter and the device and use shielded cables for all connections. 1. 1. 2 Online registration Please remember to register your new BEHRINGER equipment right after your purchase by visiting www. behringer. com (alternatively www. behringer. de) and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www. behringer. com/support). Registering your purchase and equipment helps us process your repair claims quicker and more efficiently. [. . . ] This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts. Damage/defects caused by the following conditions are not covered by this warranty: = improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. = connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. = damage/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. [. . . ]