User manual BEHRINGER SF400

[. . . ] CONTROLS Top view The MODE knob switches between different flanger-type effects. Standard: Ultra: Gate/Pan: Momentary: Classic flanger. Mono slicer effect or swirling stereo flanger, depending on mono or stereo output use. Hold the pedal depressed for effect activation. With the MANUAL control, you can adjust the center frequency to which the effect is applied. [. . . ] For stereo applications, use connector OUT B additionally. The 1/4" TS connector (BASS IN) is optimized for bass guitars. Use connector GTR IN optimized guitar performance. for The 1/4" TS connector (OUT B) sends out a signal, which together with OUT A, forms a stereo signal that can be used e. g. Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. It is operable as soon as you insert a plug into one of the IN connectors. Disconnect the plug, if you don't use the SF400. In doing so, you can extend the life time of the battery. SUPER FLANGER SF400 The SERIAL NUMBER is located at the underside. In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS GTR IN / BASS IN Connector Impedance OUT A / OUT B Connector Impedance Power supply BEHRINGER PSU-SB 1/4" TS 500 k 1/4" TS 1 k 9 V_, 100 mA regulated USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50 Hz Europe/U. K. /Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Export model 120/230 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 60 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. SAFETY INSTRUCTIONS Do not use near water, or install near heat sources. [. . . ] Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. © 2007 BEHRINGER International GmbH. [. . . ]