User manual BEHRINGER T-47 BROCHURE

[. . . ] T-1 & T-47 Large Diaphragm Condenser Tube Recording Mics Professional, large-diaphragm, tube condenser microphone for unsurpassed audio quality Hand-selected 12AX7 vacuum tube for exceptional warmth and vintage sound Ideal as main and support microphone for studio and live applications Cardioid pickup pattern for outstanding sound source separation and feedback rejection Pressure-gradient transducer with shock-mounted capsule Perfect for vocals and acoustic instruments Switchable low-frequency roll-off 20 dB input attenuation (T-1 only) External power supply with 30 ft. (10 m) multi-core cable included Heavy-duty suspension mount, windscreen and aluminum transport case included Ultra-rugged construction with metal die-cast body High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany Microphones Vacuum Tube Condenser Microphone The Ultimate Recording Mic? [. . . ] Even when subjected to high sound pressure levels, the T-1 and T-47 mics react in much the same way the human ear does. T-1 and T-47 Have a Sensitive Side Another advantage is that tube mics typically outperform transistor designs when it comes to subtle signal levels, such as environmental ambience. The T-1 and T-47 pick up every nuance of your performance, capturing an openly transparent slice of time and space -- with just the right amount of tube warmth. Now you'll be able to justify that new set of strings for your acoustic guitar (because you'll hear the difference), and you'll marvel at the sparkling highlights coming off your wind chimes. But I Need a Good Kick-Drum Mic While these mics can handle input levels as high as 130 dB, the T-1 comes equipped with a switchable -20 dB pad for the extremely high transients generated by kick-drums, heavy-metal vocalists and mortar launchers. With its 20 Hz to 20 kHz frequency range, the T-1 can handle all the low-frequency content you can throw at it, and still provide all the definition your sound source deserves. Computer equipped with Energy XT2. 5 Page 2 of 3 energyXT2. 5 DAW software available separately PSU-T Power Supply/Preamp Firewire Audio Interface T-1 or T-47 Microphone XENYX 1204FX Analog Mixer Power Switch. IEC socket. Fuse holder. Ground lift switch eliminates nasty ground loops. LOW CUT switch on reverse side of PSU-T reduces frequencies below 100 Hz by 12 db/octave. 7-pin connector powers MIC and returns audio to PSU-T. T-1 & T-47 Large Diaphragm Condenser Tube Recording Mics Condenser element. Page 3 of 3 Cardioid Polar Pattern Both of these mics feature a tight cardioid (heart-shaped) pattern, which reduces the pickup of sound from the sides and rear for improved source isolation. The included custom shock mount fits all standard microphone stands and provides further isolation from external sources of vibration, such as sounds transmitted through floor joists, outside traffic, etc. Dedicated Power Supply The included BEHRINGER PSU-T provides the supply voltage for the tube preamplifier and houses a LOW CUT switch that can be used to reduce the low frequency response, if so desired. The included 7-pin multicore cable supplies power to the mic and routes the audio signal to the XLR socket on the PSU-T. Value When it comes to value, BEHRINGER has always been an industry leader. The T-1 and T-47 tube condenser microphones take that legacy to the next level, providing studio-grade quality at incredibly consumer-friendly pricing. These great sounding mics are so affordable, you'll want one for main your vocals, one for backup vocals, another for the bass rig, another for. . . Tube view window glows red when 12AX7 receives power. Shock mount. 7-pin power/audio socket. Specifications Transducer type Polar pattern Preamplifier Output (PSU-T) Open circuit sensitivity Frequency response Level attenuation Low-cut filter condenser, 0. 63" / 16 mm cardioid vacuum tube (12AX7) gold-plated balanced XLR connector -40 dBV (0 dBV = 1 V/Pa) 20 Hz to 20 kHz -20 dB, switchable (T-1 only) 12 dB/oct. SPL (3 % THD @ 1 kHz) Dynamic range Nominal impedance Load impedance Supply voltage adapter MAINS VOLTAGE / FUSE 100-120 V~, 50/60 Hz 220-230 V~, 50/60 Hz Mains connector 130 dB 110 dB approx. [. . . ] The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. [. . . ]