User manual BEHRINGER T1954

[. . . ] T1954 Users Manual Version 1. 1 December 2001 TUBE ULTRAFEX ® www. behringer. com ENGLISH TUBE ULTRAFEX T1954 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. [. . . ] These losses are particularly obvious when copying cassettes while simultaneously using a noise reduction system. With the BEHRINGER TUBE ULTRAFEX, losses during tape duplication can be avoided or compensated for. Provided that the original is of good enough quality with only low noise levels. It is even possible to produce super copies which sound even better than the original. For this purpose, the TUBE ULTRAFEX is inserted between the line outputs of the source machine and the inputs of the target machine. Machines with post-head listening control (setting tape) allow you to check the quality of the copy while duplicating the tape. + If the tape noise is fairly high, a different strategy is required, since the TUBE ULTRAFEX can effectively process the frequency ranges in which the most predominant noise portions can be found. We recommend attenuation of noisy high frequencies, either with an equalizer or better still with a single-ended noise reduction system. The TUBE ULTRAFEX will process those frequencies with all their natural clarity - but without the tape noise. We would like to point out in this section that we offer an extremely powerful noise reduction system the DENOISER SNR2000. The noise produced by magnetic tapes or any other signal sources can be dramatically reduced with the BEHRINGER DENOISER SNR2000. Not only the noise produced by mixers, effects devices etc. , but also by synthesizers, guitars etc. , can be effectively reduced. Copied tapes and cassettes will benefit from low noise and high dynamics. The TUBE ULTRAFEX when used in conjunction with the DENOISER SNR2000 will prove an ideal combination for sound enhancement. Please contact us for further information or visit our website at www. behringer. com! 3. 5 Enhancing the Sound of Instruments The bandwidth of most electronic musical instruments is limited by its sampling rate. The BEHRINGER TUBE ULTRAFEX can improve the sound, so that synthesizers, samplers and drum machines have a more natural and transparent sound. With the TUBE ULTRAFEX even tiny details within the sound of acoustic musical instruments such as guitars etc. , can be emphasized without affecting the overall sound of the instrument. Drum instruments such as toms, bass drums etc. , benefit from a punch and thus achieve a more powerful, precise and defined sound. Please note that low-level signal sources such as microphones, guitars etc. should pass through a preamplifier before the processing stage, since the TUBE ULTRAFEX is a line-level device. 3. 6 Enhancing the Sound of P. A. and other sound reinforcement systems for background or live music, the BEHRINGER TUBE ULTRAFEX offers astounding advantages: 3. APPLICATIONS 13 TUBE ULTRAFEX T1954 1. In audio systems for announcements and background music, the TUBE ULTRAFEX is placed in a similar way to recording and tape duplication - directly before the power amp. The intelligibility and range of your system will be improved and the sonic image will become clear and transparent, even at low volume levels. [. . . ] This also applies to defects caused by normal wear and tear, in particular, of faders, potentiometers, keys/buttons and similar parts. Damages/defects caused by the following conditions are not covered by this warranty: s misuse, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. s connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. s damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. [. . . ]