User manual BEHRINGER UL2000B

[. . . ] UL2000B User's manual Version 1. 0 August 2006 ULTRALINK ULTRALINK UL2000B IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus. [. . . ] The display shows Press the SET button again to get to the LOCK submenu. The display shows LOCOFF. Press the SET button to activate the keylock function. The procedure is now over, and the basic settings are shown in the display again. Deactivating LOCK 1. Press the UP or DOWN button once to select LOCOFF. Press the SET button confirm, hence deactivating the keylock function. The procedure is now over, and the basic settings are shown in the display again. 2. 2. 7 PRESET The ULR2000 lets you work with 4 presets, each with 8 channels. Factory presets (Presets 2, 3 and 4) In the ULR2000, there are 3 factory presets (each with 8 interference-free channels). That means that all 8 channels of one preset can run simultaneously with 8 different transmitters and receivers without causing mutual interference. The channels in the 3 factory presets are all assigned to different frequencies. This way, you can always select a frequency range that assures the best signal transmission. The following table shows which frequencies are stored in the factory presets. CHANNEL 1 2 3 4 5 6 7 8 PRESET 2 798, 700 MHz 799, 950 MHz 800, 650 MHz 801, 050 MHz 802, 850 MHz 804, 500 MHz 805, 350 MHz 805, 900 MHz PRESET 3 798, 400 MHz 798, 950 MHz 799, 800 MHz 801, 450 MHz 803, 250 MHz 803, 650 MHz 804, 350 MHz 805, 600 MHz PRESET 4 798, 100 MHz 798, 650 MHz 799, 500 MHz 801, 150 MHz 802, 950 MHz 803, 350 MHz 804, 050 MHz 805, 300 MHz Table 2. 1: Factory preset frequencies (presets 2, 3 and 4) User preset (Preset 1) Preset 1 is meant for the user. Frequencies of your own choice can be stored in the 8 storage slots of this preset. If you have not stored any of your own frequencies, the frequencies stored in the user preset (Preset 1) are identical to the frequencies stored in Preset 3. Press the SET button to get to the menu. Press the DOWN button once to get to PRESET. 2. ULR2000 RECEIVER 11 ULTRALINK UL2000B 3. Press the SET button again to get to the PRESET submenu. The display shows the currently active preset. UP and DOWN buttons to select the desired preset. The display shows PSET 1 (2, Press the SET button to load up the preset you selected. The procedure is now over, and the basic setting is shown in the display again. 3. [. . . ] Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. [. . . ]