User manual BEHRINGER UMX49

[. . . ] U-CONTROL UMX49/UMX61 User's Manual Version 1. 1 August 2006 U-CONTROL UMX49/UMX61 IMPORTANT SAFETY PRECAUTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 5) Do not use this apparatus near water. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] If you now execute a PANIC command, a sound producing device receiving this command becomes silent immediately. 1) 2) 3) Press the ASSIGN push-button and hold it down. Press one of the two keys or . Release the ASSIGN push-button. Define the GLOBAL CHANNEL by operating one of the keys through on the keyboard. In order to discard your Finally, press the assignments, please press the key or press the ASSIGN push-button again. The ASSIGN LED will go off in all 3 cases. The factory setting for the GLOBAL CHANNEL is channel 1. Release the ASSIGN push-button. The device will automatically return to the normal play mode. The command "All Notes Off" will be sent immediately after you have pressed one of the two keys. 4. 2. 5 The SNAPSHOT SEND command The SNAPSHOT command triggers the transmission of all parameters including their current values. All control element assignments as well as their temporary settings on the respective channels are transmitted to the MIDI OUT socket and to the USB output of the UMX. It is possible by this method to transfer the complete UMX mapping to a sequencer software at the beginning of a song. This is to make sure the song is played with the last valid controller values. Apart from this, the SNAPSHOT allows you to reset the correct values in an external device where parameters have shifted. 1) 2) 3) Press the ASSIGN push-button and hold it down. Press the push-button on the keyboard. 4. 2. 2 Individual channel assignment The assignment of individual control elements to defined channels is useful if you want to control several external devices independently from each other. Example: You are playing synthesizer A through channel 2 with the keyboard and have a sequencer program controlling another synthesizer B through channel 5. You can now control the filter frequency of device B through one of the eight jog/shuttle controls in real time and simultaneously continue to play device A without changing the filter frequency. 1) 2) Press the ASSIGN push-button and hold it down. Activate the control element, for which another channel than the GLOBAL CHANNEL is to be set. If this is a controller or fader, briefly move the control element; when you have decided on a push-button, press this push-button once. The UMX now "knows" to which control element you would like to assign a SINGLE CHANNEL. through Release the ASSIGN push-button. [. . . ] Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. Products which do not meet the terms of this warranty will be repaired exclusively at the buyer's expense. BEHRINGER will inform the buyer of any such circumstance. [. . . ]