User manual BEKO 15LB450S

[. . . ] 2 3. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5. Your new television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 6. Performing the initial power-on settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: You can also assess Manual Search menu from the Manual Channel Search tab in the System Menu under Digital Features menu. 6. 3. 3. 1-Displaying Television and Radio channel lists and selecting the channels When the Program Table menu is opened, all TV and Radio channels stored in the list are displayed. You can navigate between the channels with Up/Down, Left/Right movement buttons or you can select any channel you wish by pressing the OK button. 6. 3. 3-Program Table With the program table, you can see the stored channels in a list, switch between TV channels and Radio channels or create your favorite channels list for 6 TV and Radio channels according to your preference. 12 6. 3. 3. 2-Creating favorite channels list You can create 6 favorite channel lists according to your personal preferences. To do this press the RED button when you are in Program table. All TV channels can be seen on the Left hand side and favorite channels on the Right hand side. In All TV Channels list select the channel you want to add to the favorites list by using Up/Down movement buttons and press OK button to confirm; name of the channel you have selected will be displayed on the favorite channels list. Repeat the same steps fore every channel you want to add. To create a different favorites list, you can change the favorite channels list by pressing FAV button on your remote control and add channels to these lists as described above. To select directly the favorite channels lists you have created, you can use the FAV button on your remote control. Note: You can also access the Favourite Lists menu from the scroll down menu of Digital Features menu. Up/Down movement buttons and navigate through the program data with Right movement button. To get further information about the program press INFO button and detailed information about the selected program will be displayed. Press the GREEN button to display next day's program information, press the RED button to display previous day's program information and press OK button to add Reminder to any program. Select PROGRAM NO tab by pressing the Up/Down 14 movement buttons in Setup menu, enter the channel number to be searched and stored automatically, then select AUTOPROGRAM tab by using the Up/Down movement buttons and press OK button; Country Selection menu will be displayed. In the Country Selection menu, select the country, whose broadcast you would like to watch in priority, by pressing the Up/Down or Right/Left movement buttons and start autoprogramming by pressing the OK button. SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM I S06 0 P13 To stop the process at any given time, please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the auto-search is complete. 6. 4. 2- Manually searching and storing the channels 6. 4. 2. 1-If you already know the channel number: Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. The Setup menu is displayed. SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM I S06 0 P13 SELECT MENU BACK COUNTRY SELLECTION BELGIUM CZECH REP DANMARK DEUTSCHLAND ELLADA ESPANA FRANCE HUNGARY IRELANDA ITALIA NETHERLANDS NORGE ÖSTERREICH POLSKA PORTUGAL SCHWEIZ SUOMI SVERIGE TÜRKYE U. K. START AUTOPROGRAMMING MENU CNANGE MENU BACK BACK The channels will be automatically searched and those found will be stored in memory starting from the program selected in the setup menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below. SEARCHING MENU % 20 STOP Select the system in which you would like to make the search from the SYSTEM tab by pressing the Right/Left movement buttons. Move into CHANNEL tab by pressing the Down movement button. Press OK on your remote control and select "S" for cable channels and "C" for channels received via the aerial. Move onto the PROGRAM NO tab and enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the right or left movement buttons. [. . . ] Is there any damage to the aerial cable?Are the plugs on the aerial cable connected correctly?Are you sure that you have pressed the correct button on the remote control? Poor picture quality · · · · Is the aerial cable connected?If you are using a satellite aerial, has the aerial been adjusted to receive broadcast in the best way? [. . . ]