User manual BEKO 32WLU550FHID

[. . . ] INTEGRATED DIGITAL FULL HD COLOUR TELEVISIONS 32WLU550FHID Operation Instructions TABLE OF CONTENTS 1 1. 1-Cleaning the screen and cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2-Disposing of your TV at the end of service life. . . 1 1. 3-Superior features of your integrated digital television . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The channel will be stored according to the program number of your choice. You can tune and store in memory other channels the same way. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button. 16 6. 4. 4-Program Table Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed. PROGRAM TABLE 00 01 CHANNEL 02 CHANNEL 03 04 SKIP MOVE SELECT 05 06 07 08 09 10 11 12 13 14 NAME DELETE BACK After setting is complete, press the EXIT button to exit the menu. 6. 4. 4. 3-Skippingastoredchannel In the event that you do not wish to see certain programs while navigating through the channels using the PR+/PR- buttons, then you can use this function. Select the program that will be hidden by pressing the up/down or right/left movement buttons. The name of the program to be skipped shall appear in red. You may perform this procedure for more than one program. To view the skipped program, directly enter the program number using the numeric buttons. To cancel the program skipping process, press again the "RED" button. After setting is complete, press the EXIT button to exit the menu. 6. 4. 4. 1-Switching the locations of the stored channels Select the program you would like to relocate by pressing the Up/ Down or Left/Right movement buttons. "Press the "GREEN" button. Move to the other program you would like to relocate by pressing the up/down or right/left movement buttons. "Finish the relocation process by pressing the "GREEN" button. The channel in the first program number you selected has been moved to your second selected program number and the channels between both program numbers have been shifted to the initially selected program number. After setting is complete, press the EXIT button to exit the menu. 6. 4. 4. 4-To name the channels You can assign your program or programs of choice the names that have a maximum of five characters. Select the program you would like to name from the Program Table by pressing the up/down or right/left movement buttons. "Press the "YELLOW" button. An empty space appears beside the channel for which you would like to specify name information. Here, choose the desired letter, number or sign using the up/ down movement buttons. For the second character, press the right movement button and then select the desired letter, number or sign again with the up/down movement buttons. After entering all the characters, store the name you have written in the memory by pressing the "YELLOW" button. [. . . ] Picture is not visible after turning on the TV Child lock is active. Test another channel for fine tuning and shadowy pictures Check the aerial system. Try pressing the mute button If your television does not work properly even though you tried the above mentioned solutions, try turning it on and off again. If you cannot start your television even though you have applied all noted methods, refer to the dealer from where you purchased the product. [. . . ]