User manual BEKO BUDL 700

[. . . ] Dear Customer, We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you an effective service. For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references. this manual · Will help you use your appliance in a fast and safe way. ⷠRead the manual before installing and operating your product. [. . . ] - The temperature setting button mustn't be switched off. - The door must not be opened too frequently. - It must be operated empty, without putting food into refrigerator. Do not pull the plug out from Important points to note while relocating your refrigerator Your refrigerator must be emptied and cleaned before moving the product. In your refrigerator must be wrapped and reinforced against shaking before packing it again. The package must be fixed with thick tapes or strong strings, and the safety rules on the packing must be followed. Each recycled item is an indispenseble source for the nature and our national wealth. If you would like to contribute to the recycling of package materials, you may get information from the environmental instutitions or municipalities. Before starting to use your refrigerator check the following. 1- Is the interior of the refrigerator dry and can the air circulation be made easly in the back part? 2- Clean the interior of the refrigerator as recommended in "Maintenance and cleaning" section. 3- Insert the plug of the refrigerator into the wall socket. the related interior lighting will be switched on when the door is opened. 4- You will hear a sound when the compressor starts operating. The pressed coolants in the cooling system may create a noise even if the compressor is not operating, and this is very normal. The general noise level is a little higher when compared to other non-no-frost units because of the operation of the fans inside the unit. This is very normal and is not a malfunction. 5- The front edges of the refrigerator may be warm. These areas are designed to be warm to prevent condensation. Extension cables and multiway plugs must not be used for connecting the unit. a damaged electric cable must be replaced by a qualified electrician. The appliance must not be operated before it is repaired! [. . . ] The operation performance characteristics of the refrigerator may be changed according to the change in the ambient temperature. The refrigerator shakes when it is moved slowly. The noise may be caused by the items put onto the refrigerator. Liquid and gas flows happen in accordance with the operational principles. [. . . ]