User manual BEKO CFM4350B

[. . . ] Dear Customers, Thank you for selecting an Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. [. . . ] Before using the appliance for the first time, clean all parts which come into contact with water carefully. Please see full details in the "Cleaning and Care" section. Make sure that the appliance is placed in an upright position and on a stable, flat, clean, dry, and non-slip surface. Pull off and fill the glass jug (6) with the required amount of water, but do not fill past the "10" mark. The brewed amount of coffee will be 10% less than the filled water, because it is absorbed by the coffee grounds and the filter. C For the good coffee taste it is suggested to operate the appliance with at least 4 cups coffee serving. C For improved heat retention we recommend that you rinse the pot with hot water before starting the brewing process. C Use only clean, cold, and fresh drinking water. There is a drip hole on the back C of the water reservoir to prevent exceeding the capacity of the coffee maker. If you add too much water, it will drip out from the back of the appliance. Pour the water in the glass jug into the water reservoir. Fill the filter basket (2) with the desired amount of ground coffee. To do this, you may use the supplied measuring spoon. Insert the filter basket (2) back into the housing and close the filter basket cover (1). Place the glass jug (6) on the warming plate (8). WARNING: If the glass jug (6) is not A placed accurately, the drip-stop (5) function will not function properly. It could cause hot water or hot coffee to overflow. Turn the appliance on by pushing the On/Off button (7). The On/Off button (7) illuminates and the brewing process begins. C The brewing process can be stopped at any time by pushing the On/Off button (7) again. The appliance is equipped with a drip-stop (5) located underneath C the filter basket (2) and enables you to briefly remove the glass jug (6) to pour coffee before the water has fi-nished running through the machine. WARNING: Make sure to place the glass jug (6) on the warming Otherwise the brewed coffee from the filter could overflow. [. . . ] Descale your coffee maker at least 4 times per year. The period depends on the water hardness in your area. The harder the water is, the more often the appliance has to be descaled. Prior to commencing the descaling process thoroughly read the manufacturer>s package insert of the descaler. [. . . ]