User manual BEKO DFS2539

[. . . ] Symbols and legend Following symbols are included in the user manual: Important information and tips about usage. Warning for hazardous situations with respect to security of life and property. warning for electrical voltage and shock hazard. TABLE OF CONTENTS 1 Getting To Know Your Machine 3 View of the Machine 3 5 Troubleshooting: 2 Safety Instructions Before Installation Before First Use Child Safety Technical Specifications For daily operation Problems What should not be washed in your dishwasher Safety notes for installation Installing Your Dishwasher Water connection Connect water inlet hose Water drainage Electrical connection Disposal 4 4 4 4 4 5 5 5 6 6 7 7 8 8 8 What to do if the dishwasher will not run 19 The cleaning results are unsatisfactory 19 Service 25 19 3 Using Your Dishwasher Filling the dishwasher salt When operating for the first time: Filling the Rinse Aid Dispenser Filling the Detergent Dispenser Detergent Multipurpose Detergents Loading the dishwasher Suggestions for loading the dishwasher Loading suggestions 9 10 11 11 12 13 13 14 15 9 4 How to clean your dishwasher 17 Cleaning the filters Cleaning the spray arms 17 18 1 Getting To Know Your Machine �� � � � � �� �� � � � � �� � View of the Machine �� 1. [. . . ] The washing program prevents damage to the appliance which may be caused by any spilled salt solution. After the first washing cycle, the salt level indicator light will go out. 1012 � Depending on the particle sizes of different salt brands in the market, tablet properties and water hardness, dissolution of the salt in water may take a couple of hours. So, the salt indicator continues lighting for a while after filling salt into the machine. (For models with a salt indicator) � 10 GB Filling the Rinse Aid Dispenser Rinse aids allow washing water to rinse off more cleanly and prevent watermarks or streaks on the dishes. Only use rinse aid designed for use in dishwashers. If you use “2 in 1” or “3 in 1“ detergents / tablets, you do not need an additional rinse aid. Open the rinse aid dispenser by pressing the locking lever (B) Carefully pour in rinse aid to the MAX mark. excessive rinse aid causes excessive foam formation , which may hinder cleaning. Set the dose of rinse aid The dose of rinse aid to be used can be set by means of the dispenser regulator (between levels 1 and 6) (4). Your appliance is pre-set at the factory to level 3. Simply press the handgrips (A) and fold them down. Ï¿½ Suggestions for loading the dishwasher Use the lower basket for plates, bowls, pots etc. Ï¿½ 1018 1016 � Bottle holder (depends on the model) For cleaning your bottles. To remove, pull the holders apart in opposite directions (H). 1020_45cm � 14 GB Cutlery basket Rack 1029 1024 Loading suggestions Load the upper basket with dessert plates, cups, glasses etc. 1028 15 GB Height setting with empty basket (depends on the model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards (C). Place the basket back into the tracks at the desired height (E). Push the latches back into the correct position. 1022 � � � 16 GB 5 How to clean your dishwasher Do not operate your dishwasher without a filter. Ensure that your filters are correctly installed. [. . . ] Grounding line - Check if your dishwasher is connected to the actual grounding line. Otherwise, the static electric created in the dishwasher may remove the protective coating on metal surfaces and cause blackening and corruption. 22 GB Detergent Remains In The Detergent Dispenser Damp detergent compartment - Make sure that the detergent dispenser is well dried prior to filling it with detergent. Putting detergent in the detergent dispenser long before washing - Take care that detergent is put shortly before startup of washing. [. . . ]