User manual BEKO DIS25010

[. . . ] Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual. [. . . ] Adjusting the height of the upper basket (depends on model) The upper basket height adjustment mechanism has been designed for you to create large spaces in the lower or upper sections of your machine depending on your needs by adjusting the height in the upper or lower direction while your basket is empty or loaded. Thanks to this mechanism, you can use your basket in three different positions, namely lower, middle and upper positions (1, 2, 3). To raise your basket, hold the upper Basket wires with both hands while the basket is in the lowermost position and pull them up (A). You will hear a "Click" from the right and left mechanisms, indicating that the basket has reached the next level. Repeat the process if the height is not sufficient. To lower the basket, while it is in the uppermost position; 1. Hold the upper basket wires with both Hands, slightly lift up the basket and simultaneously push and release the latches shown in the figure (B). L1ower the basket from its current position to the lower one. R2elease the basket after it has reached o3ne level down. Repeat the process if the height is not sufficient. C The movement mechanism may not function properly if the upper basket is overloaded or if the weight distribution is not balanced. In heavier conditions, there is the risk of falling one level down. C Make sure that the adjustment mechanism has the same positions on the right and left sides of the upper basket. (depends on model) You can use collapsible wires when you need a larger space for your dishes in the upper basket of your machine. To bring the collapsible wires into horizontal position, grab the wire from the middle position and push them in the direction of arrow in the figure. Place your larger dishes into the area created. To bring the wires back to vertical position, just lift them up. By placing them between the bars on the basket. C Bringing the wires to the horizontal position by holding them from the tips may cause them to bend. Therefore, hold the wires from their stems while bringing them to the horizontal or vertical positions. On/Off key When you press On / Off key, indicator lights illuminate on the display for ON position. Programme Selection / Programme Cancel key Press this key until the desired programme appears in the programme indicator. [. . . ] Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting. Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. [. . . ]