User manual BEKO DSFN1530

[. . . ] · Push in the on/off button and check that the programme light comes on. · Check the salt and rinse aid level indicators before you start the machine. · Use the programme selection button to choose your washing programme. [. . . ] soiled daily dishes that are dishes that are kept waiting kept waiting. are cleaned in the fastest way. Detergents A=25 cm³/15 cm³ B=5 cm³ Pre-wash End Few A Wash Cold rinse Hot Rinse End Medium A+B Pre-wash Wash Cold rinse Hot Rinse Dry End Medium A+B Wash Cold rinse Hot Rinse Drying End High A+B Pre-wash Wash Cold rinse Hot Rinse Dry End Programme sequence (without options) Duration (min) Water (I) Energy (kWh) Half Load 14 4, 2 - 30 11, 8 0, 79 - 136 15 1, 05 + 58 11, 8 1, 32 + 115 17, 5 1, 67 + The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme. QUICK REFERENCE GUIDE 1 2 3 4 GB On/Off button Rinse aid level indicator light Half Load (1/2) Programme selection button Programme indicator lights Salt level indicator light LED progress indicator lights Start/Pause button 5 6 7 8 On/off button You turn your dishwasher on / off with this button. When turning on, the indicator light for the last used programme will light up. Visual Indicator !Important: Depending on the stage of the programme you have cancelled, there may be detergent residue or rinse aid inside the machine and on the load. Make sure the items in the dishwasher are not used before washing properly. How to change the washing program To change the program selection while the machine is operating open the door. Care must be taken when opening the door, as steam will escape. The indicator light will be on and close the door new program will start. Important: The new program will NOT start right from the beginning. It will start from the stage last carried out by the previous program selection. Warning Depending on the length of the terminated program detergent and rinse aid may still be in the dispensers. Improper Loading Of Dishware Salt level indicator light When this indicator light comes on, you must refill special salt (If applicable). In machines which do not possess an electrical salt indicator, the salt content can be read on the container for the salt. When the visual fill indicator is dark, there is enough salt in the container. When the colour is light, open the container and add dishwasher salt. Visual Indicator Program selection buttons Use the program selection button to select the desired program. The corresponding program light lights up Half Load (1/2) button When there are few dishes, you press this button after pressing the programme selection button. When turning the dishwasher on, the indicator light on the button lights up. [. . . ] The programme is cancelled when Start/Cancel indicator light goes off. Then you can choose and start a new programme. Rinse aid level indicator light If this indicator light comes on, you have to refill rinse aid (If applicable). You can also tell whether rinse aid must be refilled by looking at the rinse aid dispenser. [. . . ]