User manual BEKO SC524

[. . . ] ·KeepthisOperatingManualwithineasyreach. Youmayneeditinthefuture. ·Pleasereadalladditionaldocumentssuppliedwiththismachine. PleasenotethatthisOperatingManualmaybeapplicableforseveralothermodels. Differences between models will be identified in the manual. Explanation of symbols ThroughoutthisOperationManualthefollowingsymbolsareused: C Important information or useful hints about usage. [. . . ] auxiliary function, but you cannot ·If the machine is not spinning, the select pre-wash. programme may be in rinse hold The spin speed and temperature mode or the automatic spin correction which are selected first will keep on system has been activated because being valid even if the position of the of unbalanced distribution of laundry spin speed or temperature selection in the machine. Press the "Start/ Pause/Cancel" button and switch the machine to "Pause" mode in Changing the programme after order to change the spin speed or the programme has started temperature. New spin speed or You can use this feature after your temperature can be selected. machine has started to wash different textile groups in the same batch Adding/removing laundry in standby of clothes under higher or lower mode temperatures. If you want to add more laundry into the For example; machine after the washing cycle has Press and hold the "Start/Pause/ started, put the machine into "Pause" Cancel" button for 3 seconds to mode by pressing the "Start/Pause/ "Cancel" the programme in order to Cancel" button. The "Ready"lamp on the select "Cottons 40" programme instead programme follow-up indicator will light of"Cottons 60" programme. up steadily after 1-2 minutes if the water 19 EN level in the machine is suitable. Laundry may be added or taken out by opening the door. If the "Ready" lamp does not light up continuously at the end of this time, the water level in the machine is not suitable and laundry cannot be added. You can resume the programme by pressing the "Start/Pause/Cancel" button again. middle of the process, "Wash" and "Spin/End " lights will light up. The machine can drain all the water or can take in water for 3 times at most to cool down the clothes and complete draining process. When water discharging process is completed, "Wash" light will go off, "Spin/End" light will light up. You can make a new programme selection when the "Ready" light is lit continuously. Machine allows adding more laundry during a later step only if the water level is low enough to open the loading door or if the temperature in the machine is low enough. In order to add laundry after the start-up of the programme: 1. "Ready" lamp will light up continuously when the door is allowed to open. Open the loading door and put in more laundry. Programme is in rinse hold mode After the machine fills with water in the final rinse step, clothes can be soaked in the machine as long as desired. When it reaches this position while the machine is running, the "Start/Pause/ Cancel" light will flash. In the machines equipped with spin speed selection knob, you can spin by selecting the desired spin speed and press "Start/Pause/Cancel" button. As for machines not equipped with a spin speed selection knob, you can end the programme without spinning by pressing the "Start/Pause/Cancel" button to drain the water. [. . . ] The "Lid" light is flashing. The front door may be ajar. by pressing the Water may have been cut You can restart your machinefor a short time "Start/Pause/Cancel" button off. after ensuring that the water is not cut off. For your safety, the front door can only be opened 2 minutes after the programme is completed. The "Lid" light will flash during this period. EN It shows the safety period until the door lock is opened. 31 9 Guarantee Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. [. . . ]