User manual BEKO SGA7126P

[. . . ] Dear Customer, Thank you for preferring this Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-theart technology. Therefore, please read this user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. [. . . ] This condition will return to normal after several uses. Cotton Linen - Jean • •• ••• Max Without steam With Steam With Steam With Steam A WARNING: Do not allow the iron to contact with metal parts such as zippers and rivets. This may damage the soleplate of the iron. 3 Ironing tips C • The appliance gets heated in a short time; iron WARNING: You can do steam fabrics such as synthetic, silk etc. using low ironing at all temperature levels temperature settings. Except for “•” Press the steam • Iron fabrics that may luster (silk etc. ) by turning trigger (12) for steam ironing. Them inside out or using the appliance in SmartECO mode. WARNING: Take the ironing • Use very little pressure when ironing fabrics instructions specified on the label such as velvet and iron them towards one single of the fabric into consideration for direction. €¢ 100% pure woolen clothes can be ironed by Your appliance will not raise steam as long as you using steam. You can do steam ironing by using the steam trigger (12) in this mode. A A 8 / 104 EN Steam Station / User Manual 3 Operation In order to use dry ironing, do not press the steam 3. Fill the water reservoir (5) with water (see 3. Place the appliance on the steam station 3. €“ You will hear a beeping sound when the water reservoir with water without appliance starts to operate. Removing the iron from the steam – Control panel (10) flashes once and then goes off. Press the on/off button (11), switch off and some noise during the water unplug the appliance. Remove the water reservoir (5) by pressing the water reservoir removal latch placed under the The appliance starts in Smart-ECO water reservoir. This level offers safe temperature and steam amount for all the fabrics that can be ironed. You can set temperature levels other than the Smart - ECO mode by using the control button (11) (see 3. Open the water refill lid (6) and fill water up to 6. When the symbol of the selected setting flashes the MAX level. [. . . ] Switch off and unplug the appliance before cleaning. Soak the new cartridge in water for 5 minutes in 2. Wait for the appliance to cool completely. Use a slightly damp cloth to clean the exterior of 3. [. . . ]