User manual BEKO TLDA521

[. . . ] Tall Larder Fridge BEKO plc Beko House Caxton Way Watford Hertfordshire WD18 8UF Tel: 01923 654650 Fax: 01923 819653 e-mail: service@beko. co. uk website: www. beko. co. uk Printed in Turkey Part no: 48 2572 00 00 Revision no: 0 Operating Instructions Congratulations on your choice of a service for many years. quality Appliance which has been designed to give you CONTENTS PAGE WARNING !DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed. · Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally. · If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children. [. . . ] 1) and may be set at any position between 1 and 5, 5 being the coldest position. Towards 5 you will obtain a colder fridge temperature and vice versa. Set the thermostat knob to ensure an average of +5 °C (40°F) is achieved in the fridge after 24 hours. (Fig. 2) shows how you can switch off the appliance completely: Turn the thermostat knob to "0" (Zero) position. The average temperature inside the fridge depends on the following factors: · Ambient temperature in the room (seasonal changes) · Frequency of door opening · Placing hot food inside the product · Position of the product We recommend that you check the temperature with an accurate thermometer to ensure that the storage compartments are kept to the desired temperature. Remember you must take your reading very quickly since the thermometer temperature will rise very rapidly after you remove it from the appliance. Please remember each time the door is opened cold air escapes and the internal temperature rises. Therefore never leave the door open and ensure it is closed immediately after food is put in or removed. ** Any dust that gathers on the condenser, which is located at the back of the appliance, should be removed once a year with a vacuum cleaner. ** Check door seals regularly to ensure they are clean and free from food particles. ** Removal of door rack : 2 · To remove a door rack, remove all the contents and then simply push the door tray upwards from the base. ** Make sure that the special plastic container (drain tray) at the back of the appliance which collects defrost water is clean at all times. If you want to remove the tray to clean it follow the instructions below : · Switch off at the socket outlet and pull out the mains plug. · Push the lug down with the tip of a screw driver & pull out firmly. · Clean the drain tray and wipe it dry. · Reassemble reversing the sequence and operations. 1 The larder refrigerator defrosts automatically. The defrosting water runs to the drain tube via a collection channel (1) and is evaporated in a special container at the back of the appliance (see diagrams). Ensure that the container is fixed properly Special Container above the compressor. During defrosting water droplets may form at the back of the larder refrigerator where concealed evaporator is located. Some droplets may remain on the liner and refreeze when defrosting is completed. Do Compressor not use pointed or sharp edged objects such as knives, forks to remove the droplets which have refreezed. If at any time the defrost water does not drain from the collection channel, check to ensure that no food particles have blocked the drain tube. [. . . ] · The cost of functional replacement parts, but excluding consumable items. · The labour costs of a Beko approved repairer to carry out the repair. · Transit, delivery or accidental damage or misuse and abuse. · Cabinet or appearance parts, including knobs, flaps, handles or container lids. [. . . ]