User manual BEKO TLDA567

[. . . ] Tall Larder Fridge TLDA 567 BEKO plc Beko House Caxton Way Watford Hertfordshire WD18 8UF Tel: 0845 6004911 Fax: 0845 6004922 e-mail: service@beko. co. uk website: www. beko. co. uk Printed in Turkey Part no: 48 6204 00 02 Congratulations on your choice of a service for many years. quality Appliance which has been designed to give you CONTENTS PAGE WARNING !DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed. · Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally. · If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children. [. . . ] Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend that you check the temperature with an accurate thermometer (see; Temperature Control and Adjustment). Important Note : Ice formation at the back is normal, do not worry. (See Defrosting) DEFROSTING CLEANING AND CARE ** We recommend that you switch off the larder refrigerator at the socket outlet and pull out the mains plug before cleaning. ** Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent and wax polish for cleaning. ** Use luke warm water to clean the cabinet of the refrigerator and wipe it dry. ** Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of soda to one pint of water to clean the interior and wipe it dry. ** Make sure that no water enters the temperature control box. ** If the larder refrigerator is not going to be used for a long period of time switch it off, remove all food, clean it and leave the door ajar. ** Any dust that gathers on the condenser, which is located at the back of the appliance, should be removed once a year with a vacuum cleaner. ** Check door seals regularly to ensure they are clean and free from food particles. ** Removal of door rack : 2 · To remove a door rack, remove all the contents and then simply push the door tray upwards from the base. ** Make sure that the special plastic container (drain tray) at the back of the appliance which collects defrost water is clean at all times. If you want to remove the tray to clean it follow the instructions below : · Switch off at the socket outlet and pull out the mains plug. · Push the lug down with the tip of a screw driver & pull out firmly. · Clean the drain tray and wipe it dry. · Reassemble reversing the sequence and operations. 1 The larder refrigerator defrosts automatically. The defrosting water runs to the drain tube via a collection channel (1) and is evaporated in a special container at the back of the appliance (see diagrams). Ensure that the container is fixed properly Special Container above the compressor. During defrosting water droplets may form at the back of the larder refrigerator where concealed evaporator is located. Some droplets may remain on the liner and refreeze when defrosting is completed. [. . . ] · Cabinet or appearance parts, including knobs, flaps, handles or container lids. · Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets, filters and light bulbs. · Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book. · Repairs to products used on commercial or non-residential household premises. [. . . ]