User manual BEKO VRR 60110 VW

[. . . ] Dear Customer, Thank you for choosing a BEKO product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. [. . . ] The blue light on the charging unit (14) stays lit while the unit is active. If the adapter is unplugged or power outage occurs when the appliance is in the charging unit (14), the appliance will leave the charging stand without a cleaning mode selected and c start searching for the charging station. In this case, turn the appliance off using the power button on the side (6). When the power outage is over or you plug in the adapter, turn the power on and send the appliance to the charging unit using the controller (15) or the mobile application and wait for it to settle. C The indicator on the appliance will blink in red colour while charging. C After completely charging, the indicator on the appliance will remain in blue colour. C When the battery is low in standby mode, the indicator will blink twice in a second. C When the battery is low in cleaning mode, the appliance will find the charging unit (14) Press the "AUTO" button on Or; press the "Start/stop" Cleans the entire area following a zigzag cleaning route. At the end of cleaning, the robot will return to the charging station. Press the "MODE" button on the remote controller until "MODE1" is displayed on the screen. The appliance cleans the edges of the wall and remains clear of the charging unit (14) to avoid crashing during operation. At the end of cleaning, the appliance will return to the charging unit. Press the "MODE" button on the remote controller until "MODE2" is displayed on the screen. Press the "MODE" button on the remote controller until "MODE3" is displayed on the screen. The appliance will switch to the mode of cleaning the 2m*2m area that it is located. At the end of cleaning, the appliance will switch to standby mode. mODE3 The appliance will switch to random cleaning mode and will clean the room following a random route. Cleaning will continue until the appliance runs out of battery, then it will move to the charging unit (14) to recharge. Press the "MODE" button on the remote controller until "MODE4" is displayed on the screen. The appliance will operate two laps of cleaning by following a zigzag route. At the end of cleaning, the appliance will return to the charging unit (14). Press on the "MAX" button on the remote controller (15) to start the maximum level cleaning while the appliance is in standby or cleaning mode. [. . . ] Turn off and unplug the appliance before cleaning. A WARNING: Never use gasoline, solvent, abrasive cleaners, metal objects or hard brushes to clean the appliance. C You may call our call center to order a new filter when your filter reaches expected life, is deformed or needs to replaced for a reason. C To achieve the maximum performance with HEPA filter, clean with a brush after each cleaning. [. . . ]