User manual BEKO WM6167

[. . . ] Automatic washing machine WM 6167 W WM 6167 S Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference. This operation manual will. . . . . . help you use your machine in a fast and safe way. ·PleasereadtheOperationManualbeforeinstallingandstartingyourmachine. ·Particularlyfollowtheinstructionsrelatedtosafety. [. . . ] Press"Start/Pause/Cancel"button (Figure2-8). Thenthetimedelay starts to count down. Time delaying symbol(Figure3-2h)willlightup. The":"inthemiddleofthedisplayed time delay will start flashing. · Morelaundrymaybeloadedor taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol(Figure3-2h)fadesand the washing starts as the program duration is displayed. Changing the delay time If you want to change the time during thecountdown: 1. Press"Start/Pause/Cancel"button (Figure2-8). ":"inthemiddleofthe screen will stop flashing. Timedelayingsymbol(Figure3-2h) willflash. StartSymbol(Figure3-2j) will fade. Press"Timedelaying"buttons"+" and"-"(Figure2-6)tosetyour desired time delay. Press"Start/Pause/Cancel"button. Timedelayingsymbol(Figure3-2h) willlightup. Standbysymbol(Figure 3-2k)willfade. Startsymbol(Figure 3-2j)willlightup. The":"inthemiddleofthedisplayed time delay will start flashing. 21 Canceling the time delay If you want to cancel the time delay countdown and start the program immediately: 1. Press"Start/Pause/Cancel"button (Figure2-8). The":"inthemiddle of the displayed time delay will stop flashing. Thestandbysymbol(Figure3-2k) andthetimedelayingsymbol(Figure 3-2h)willflash. Presstimedelayingbutton"-" (Figure2-6)todecreasethedesired timedelay. Programdurationafter 30 minutes shall be displayed. Press"Start/Pause/CancelButton" to start the program. Starting the program 1. Press"Start/Pause/Cancel"button (Figure2-8)tostarttheprogram. Thestartsymbol(Figure3-2j)which indicates that the program has started will light up. The door locks and the door locked symbol(Figure3-2i)willlightup. Symbol of the relevant step (prewash, mainwash, rinse, softener andspin)thattheprogramhas startedfromwilllightup(Figure 3-2f). Progress of program. The progress of a running program is shown through a number of symbols on the screen. · At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. [. . . ] The"On/Off"button might have not been pressed. The machine did not start after the program The front door may be was selected and the «Start/Pause/Cancel» ajar. The Rinse Symbol amongsttheProgram Indicator Symbols is flashing. (Subjecttothe Water may have been model of your machine, cut off. water cut-off symbol maylightuptoo) Check the plug. [. . . ]