User manual BELKIN BLUETOOTH HEADSET

[. . . ] In this package, you will find: One Belkin Bluetooth Headset One Neck strap One Desktop charger Two Ear cushions One User's guide One earhook Three front covers for replacement The Bluetooth wireless technology is set to revolutionize the personal connectivity market by providing freedom from wired connections. It is a specification for a small form-factor, low-cost radio solution providing links between mobile computers, mobile phones and other portable and handheld devices, and connectivity to the Internet. The Bluetooth Special Interest Group (SIG), comprised of leaders in the telecommunications, computing, and network industries, is driving development of the technology and bringing it to market. Talk Button: Switches the headset on/off, answers/ends a call, pairs the headset with a device, and is used for voice dialing. [. . . ] The headset switches off and the LED indicator no longer blinks. Before using the headset, you must first pair it with a Bluetooth wireless technology enabled device, such as a Bluetooth mobile phone. Pairing is necessary for two Bluetooth devices to connect each other wirelessly. After creating a paired link, you do not need to repeat the pairing process and the headset automatically links to the mobile phone when both devices are switched on. Paring must be performed every time you want to use the headset with a different Bluetooth mobile phone or other Bluetooth wireless technology enabled devices. The headset can be paired simultaneously with up to 8 mobile phones. To initiate pairing between the headset and a Bluetooth mobile phone in close proximity: 1. Make certain the mobile phone is switched on. Press the Talk button to switch on the headset, and keep the Talk button pressed for 7 seconds until the LED indicator alternates between blue and red. The headset is now ready for pairing with the mobile phone. Follow the phone instructions to accept pairing. When prompted to enter the passkey, enter the number : 0000. If time runs out after 60 seconds and the pairing fails, you will have to repeat the steps above. You can view the status from the phone's screen. on completing pairing , the phone's screen will notify you that the pairing was successful. The LED indicator continuously flashes blue, and the headset goes into standby mode. You can now make and answer calls through the headset. Before using the headset, make sure that (1) the headset is switched on and connected to a paired. Bluetooth mobile phone; (2) the headset is within 10 meters of the phone; and (3) the phone's Bluetooth feature is on (see your phone's user's guide). nOTE: The headset supports both Headset and Hands-Free profiles. Some mobile phones don't Support all functions listed below. When an incoming call comes, the headset rings and the LED indicator flashes blue at a 3-second interval. [. . . ] Repaired or replaced product will be returned to you at the same revision level as received or higher at Belkin's option. belkin reserves the right to replace discounted product with an equivalent generation product. This warranty does not apply if the product has been damaged by accident, abuse, misuse or misapplication; if the product has been modified or dismantled without the written permission of Belkin;or if any Belkin serial number has been removed or defaced. The warranty and remedies set forth above are exclusive and in lieu of all others, whether oral or written, expressed or implied. [. . . ]