User manual BELKIN F1D084V2

[. . . ] belkin. com Belkin Corporation 501 West Walnut Street Compton · CA · 90220 · USA Tel: 310. 898. 1100 Fax: 310. 898. 1111 Belkin, Ltd. Express Business Park Shipton Way · Rushden · NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin B. V. Starparc Building · Boeing Avenue 333 1119 PH Schiphol-Rijk · The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin, Ltd. 7 Bowen Crescent · West Gosford NSW 2250 · Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 US: 310. 898. 1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 666 040 Belkin Tech Support P74592 © 2004 Belkin Corporation. All trade names are registered trademarks of respective manufacturers listed. OmniView CAT5 Extender TM Control your computer or KVM switch from up to 330 feet away User Manual F1D084 ver. [. . . ] No other manufacturer offers a more complete set of KVM accessories! Package Contents: · · · · OmniView CAT5 Transmitter and Receiver 5V DC, 600mA Power Supply User Manual Registration Card 1 OVERVIEW Receiver Orange Power LED Picture Adjust Dial Power Jack Green Control LED Remote Console Ports RJ45 CAT5 Port Transmitter Keyboard Cable VGA Cable Mouse Cable Green Control LED Orange Power LED Local Console Ports RJ45 CAT5 Port Receiver LEDs Orange - Power on Green - Blinks when Transmitter position has control Transmitter LEDs Orange - Power on Green - Blinks when Receiver position has control 2 INSTALLATION 1. Power off your computers and/or KVM switch. Using the KVM cable that is built into the Transmitter module, connect the male VGA cable to the VGA port on your computer or KVM switch. Connect the PS/2 cables to the PS/2 ports on your computer or console ports on your KVM switch. Pay particular attention to which cable connects to which port. Connect the video cable that is attached to your local monitor to the Console VGA port located on the Transmitter module. Connect the local PS/2-type keyboard and mouse to the Console PS/2 ports located on the Transmitter module. Connect the video cable that is attached to your remote monitor to the Console VGA port located on the Receiver module. Connect the remote PS/2-type keyboard and mouse to the Console PS/2 ports located on the Receiver module. Take one end of a CAT5 cable and plug it into the RJ45 port on the Transmitter module. Plug the other end into the Receiver module. Note: The CAT5 Extender supports a solid cable only. Plug the power adapter into the wall, then plug the other end into the Receiver module's power jack. Transmitter Transmitter Receiver 3 NOTES · · · · Avoid using a specialized mouse (a mouse with scrolling wheel is ok) Avoid using a specialized keyboard (a keyboard with special shortcut keys) Not compatible with serial mouse ports or KVM switches using serial mice at the console. You can adjust the Picture adjust dial to improve VGA quality at longer distances 4 INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F1D084 ver. 2 to which this declaration relates: Complies with Part 15 of the FCC Rules. [. . . ] BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations of exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. 5 [. . . ]