User manual BELKIN F1D102

[. . . ] P73039_F1D102-eng_man. qxd 9/26/00 3:42 PM Page 1 The OmniView SE 2-Port User Manual TM P73039 F1D102 P73039_F1D102-eng_man. qxd 9/26/00 3:42 PM Page 1 Introduction Thank you for purchasing the Belkin Components OmniViewTM SE KVM switch. Controlling multiple PCs from one keyboard, mouse and monitor has never been easier!Compatible with AT and PS-2 style computers, it is loaded with features such as Integrated Mouse Conversion Technology, separate DB25 daisychain ports, and an optional 19" (48. 3cm) rackmount kit. It has complete keyboard and mouse emulation for error-free boot-ups, plus Microsoft® IntelliMouse® support. [. . . ] · Make sure that the daisy-chain cable that you are using is the F1D108-CBL. Using any other cable will not guarantee proper operation or video quality. · RESET the MASTER OmniViewTM SE (or OmniViewTM PRO), whichever the case may be. Monitor/Video Problems: Q: I am getting ghosting, shadowing or fuzzy images on my monitor. A: · Check the cables and make sure they are inserted properly. · Your resolution and/or refresh rate is extremely high, or your cable is too long. Replace your VGA cables with coaxial, double-shielded cables such as Belkin A3H981-XX. · Check to make sure that the power adapter is plugged in and is working properly. · Lower your refresh rate and/or screen resolution settings. Keyboard Problems: Q: The keyboard is not detected, or a keyboard error is reported during boot-up. A: · Check the cables and make sure they are inserted properly in the correct ports. · Check to make sure that the power adapter is plugged in and is working properly. · RESET the OmniViewTM SE by simultaneously pressing the BANK/SCAN and CHANNEL buttons on the front panel. · Do not press any keys on the keyboard while the selected computer is booting up. This is true for any PC, whether stand-alone or connected to a KVM switch. Q: The computers boot up fine, but the keyboard does not work. A: · Check the cables and make sure they are inserted properly in the correct ports. · Make sure the keyboard works when directly plugged into the computers. · Try a different keyboard, but use only 101, 102 or 104-key keyboards. · Make sure that the keyboard driver is for 101, 102 or 104-key keyboards, and not old XT keyboards. · Check to make sure that the power adapter is plugged in and is working properly. · RESET the OmniViewTM SE by simultaneously pressing the BANK/SCAN and CHANNEL buttons on the front panel. PS/2 Mouse Problems at the Console or Computers: Q: The mouse is not detected during boot-up. A: · Check the cables and make sure they are inserted properly in the correct ports. · Check your computer/motherboard documentation making sure that the PS/2 mouse port (or IRQ) is enabled. [. . . ] Non-standard mice often use non-PS/2 proprietary mouse protocol. · Make sure you do not have any other mouse drivers loaded in your config. sys or autoexec. bat files. · Avoid moving the mouse or pressing the mouse buttons when switching ports. · Reset the mouse to resume proper mouse movement simply by unplugging the mouse from the OmniViewTM SE for about 2-3 seconds, and plugging it in again. [. . . ]