User manual BELKIN F1DE101N

[. . . ] OmniView Remote IP Console User Manual TM F1DE101N ENTERPRISE Series13 TABLE OF CONTENTS Introduction . . 31­32 Warranty, FCC, and CE Statements . . 33 INTRODUCTION Congratulations on your purchase of this Belkin OmniView ENTERPRISE Series Remote IP Console (the Unit). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a reasonable price. [. . . ] Normal "Normal" means the user can log in and use the Unit with full privileges. User X Name: User X Password: User X Flags: UserX ****** Normal 9. Fig. 16 View Only "View only" means the user can watch what the server is doing but cannot send keyboard and mouse commands. Disabled In the "Disabled" mode, the Unit will not accept the login name or user ID. To enable the new user name, you must change the value to "Normal" or "View Only". 20 SERIAL PORT FUNCTIONS The Unit has two serial ports. Each may be used for four different purposes: 1. ENTERPRISE Series Remote IP Console Log--outputs log from the Unit's serial port. The following is an example of format of the log output: "@ Tue, 14 Aug 2001 15:34:37 -400 INFO: System startup. (Previously up at: Tue, 14 Aug 2001 15:32:32 -400) @ Tue, 14 Aug 2001 15:34:22 -400 INFO: Random words are 76/160 (47%) ones (passed test). " The Unit's log can also be read from the web interface. Telnet--allows remote telnet user to connect to serial device. The user must connect the serial cable to the serial device, configure the serial port, and start "Telnet" to the device through the Unit. The Unit is transparent in this mode and allows bidirectional link. Watchdog--detects and logs the presence or absence of a string. Watchdog pattern (string): Each line of input (to the Unit) will be matched against this simple string. Only lines that contain this string will be logged in Watchdog mode. If this field is empty, then all lines will be logged. Watchdog mode: Choose what to do with lines that match the pattern. See "Monitoring Settings" section to configure what happens with the alert. Watchdog timeout: Period of time during which a matching string must be seen, before an error condition is considered to have occurred. Used only with Watchdog mode "Alert if missing". Power Control--connects to a serial device to turn off/on power to the controlled device. This feature is ideal for controlling power bars with serial protocol capabilities. [. . . ] The problem could be a configuration issue. Check the "Java Viewer port number (clear)" and "Java viewer port number (SSL)". These numbers must be different port numbers from the web server whose default is 80 and 443. Reset the two ports to 19900 and 19901, respectively, which are the factory defaults. [. . . ]