User manual BELKIN F1DE108B

[. . . ] P74042_F1DE108E_man. qxd 5/6/02 10:06 AM Page 1 OmniView 8-Port KVM Switch with Quad-Bus Video Technology TM F1DE108B ENTERPRISE Series13 P74042_F1DE108E_man. qxd 5/6/02 10:06 AM Page 3 TABLE OF CONTENTS Introduction Overview Glossary of Terms . . 10 Standalone KVM Switch--Installation . . 11 Multiple KVM Switches--Installation (Daisy-Chaining) . . 15 Using Your KVM Switch Powering up the Systems . [. . . ] · AutoScan will skip any servers that the user does not have permission to view. · One port LED will be lit, corresponding with the port in focus. · The Console LED will be lit, indicating that this KVM Switch is a Console. · On a standalone KVM Switch, the 7-segment LEDs will display the ID of the port in focus, but on a daisy-chained KVM Switch, the 7-segment LEDs will display the ID of the BANK in focus. Note: Alternatively, the control keys can be used to enter commands (usage is identical to the Scroll Lock key); this provides compatibility for keyboards that don't have Scroll Lock keys. Using the MultiView Feature This KVM Switch is capable of allowing multiple users to view the same server simultaneously; however, only the first Console to focus on that server will have control (be capable of input). When a second Console focuses on the same server, the View-Only Console's banner will display "View-Only". If the banner is enabled on the viewing Console, then the "View-Only" banner will be displayed as long as that Console is focused on a computer it can't control. If the banner is disabled on the viewing Console, then the "View-Only" banner will be displayed for five seconds. If the controlling Console switches focus to another computer, then control will be granted to another Console. AutoScan Mode Using the AutoScan Function from the Front Panel: In AutoScan mode, the KVM Switch remains on one port for a configured interval (1­99 seconds) before switching to the next computer. The time interval is configured in IntelliView. To enter AutoScan mode, press the AutoScan button. On a standalone KVM Switch, pressing and releasing any button on the front panel will cause the KVM to beep and exit AutoScan mode. If you pressed a direct-access port selector, the KVM will also switch the focus to the selected port. If you don't have permission to access the selected port, the KVM will beep, switch focus away from the selected port, and IntelliView On-Screen Display Menu Control The IntelliView graphical On-Screen Display (OSD) is intended to have a look and feel similar to Windows-based systems popular on personal computers. To bring up the IntelliView, press on "Scroll Lock + Scroll Lock + Space Bar". 22 23 P74042_F1DE108E_man. qxd 5/6/02 10:06 AM Page 24 USING YOUR KVM SWITCH IntelliView OSD Features The main page is the initial screen that will appear after opening IntelliView. The screen layout is similar to many Windows-based systems that exist. The user will see a window with a title bar containing some controls and a main area where the user accesses the features of the KVM Switch. The top-right side of the IntelliView title bar identifies the Console that is being used and the user that is currently logged in. Selecting the "?" button will display the help screen. The help screen will show a description of the current page and will describe all available controls. Selecting the "X" button will close the page the user is viewing. The main page also has an "Exit" button that closes IntelliView. The exit button is the default key, so pressing "Enter" will also exit IntelliView, unless another button has focus. [. . . ] I am getting a black screen on my monitor. · Check that all video cables are inserted properly. · Connect your monitor directly to the computer to verify that your monitor is functioning properly. DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F1DE108B to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]