User manual BELKIN F1DE116C

[. . . ] OmniView TM KVM Switch with Micro-Cabling Technology Control up to 16 servers from up to two consoles · Expandable to up to 256 from up to four consoles User Manual ENTERPRISE Quad-Bus Series F1DE108C F1DE116C F1DE208C F1DE216C TABLE OF CONTENTS Introduction Overview Feature Overview . Equipment Requirements Operating Systems . . 2 4 4 5 6 Installation Pre-Configuration . . 9 Connecting Multiple Switches (Daisy-Chaining) . [. . . ] Computer Name Column The Computer Name column displays the name of each connected computer. The computer name can be set by the KVM administrator (see the Setup page section below for information on changing the computer name). The computer list can be sorted on this field by clicking on the column header. ID Column The ID column displays the BANK and port numbers of the Switch where the computer is connected. The computer list can be sorted on this field by clicking on the column header. Keyboard Column The keyboard column displays the status of the current keyboard connection, and is updated in real time. If the connection to the computer is via a PS/2 cable, a small keyboard icon is displayed. If the keyboard connection to the computer is via USB, the USB trident symbol is displayed. If no keyboard is detected, the cell will be empty. 24 USING YOUR SWITCH Mouse Column The mouse column displays the status of the current mouse connection, and is updated in real time. If the connection to the computer is via a PS/2 cable, a small mouse icon is displayed. If the mouse connection to the computer is via USB, the USB trident symbol is displayed. If no mouse is detected, the cell will be empty. Security Column The security column displays the security settings for the current user. If this user is restricted from accessing a computer, a closed padlock symbol is displayed. If the user is allowed to access the computer, the cell is empty. Note: The KVM administrator can prevent computers from appearing in the Main View if the user doesn't have rights to access them (for additional information, see the Options page, on page 30). Console Column The console currently viewing the computer is indicated in this column by its corresponding letter (A­D). If multiple consoles are focused on the same computer, an asterisk will appear in the console cell. AutoScan Button Click the AutoScan button or press "ALT + A" on the keyboard to toggle the AutoScan feature. Setup Button Click the "Setup" button or press "ALT + S" on the keyboard to access the OSD Setup pages. If the user is not logged in as Admin, the Setup button will not be selectable (grayed-out). Logout Button Click on the "Logout" button or press "ALT + T" on the keyboard to return to guest-level access. [. . . ] Select Mode: The mode of operation a daisy-chained KVM switch, in Static Mode, enters when the first front-panel button is pressed. Select Mode allows the user to select BANKs, hosts, etc. with the next button press. 44 GLOSSARY Standalone: A single KVM switch that operates independently (not connected to others). Static Mode: The predominant mode of operation of the KVM switch. [. . . ]