User manual BELKIN F1DW216C

[. . . ] OmniView TM KVM Switch with CAT5 Extension Control up to 16 servers located up to 1000 feet away from your KVM Switch with up to two consoles · Expandable for control of up to 256 servers from four consoles User Manual ENTERPRISE Quad-Bus Series F1DW116C F1DW216C TABLE OF CONTENTS Introduction . 10 Connecting Multiple Switches (Daisy-Chaining) . 17 Selecting a Computer Using Direct-Access Port Selectors . 17 Selecting a Computer Using Keyboard Hot Key Commands . [. . . ] The computer name can be set by the KVM administrator (see the Setup page section below for information on changing the computer name). The computer list can be sorted on this field by clicking on the column header. ID Column The ID column displays the BANK and port numbers of the Switch where the computer is connected. The computer list can be sorted on this field by clicking on the column header. Keyboard Column The keyboard column displays the status of the current keyboard connection, and is updated in real time. If the connection to the computer is via a PS/2 cable, a small keyboard icon is displayed. If the keyboard connection to the computer is via USB, the USB trident symbol is displayed. If no keyboard is detected, the cell will be empty. 23 USING YOUR SWITCH Mouse Column The mouse column displays the status of the current mouse connection, and is updated in real time. If the connection to the computer is via a PS/2 cable, a small mouse icon is displayed. If the mouse connection to the computer is via USB, the USB trident symbol is displayed. If no mouse is detected, the cell will be empty. Security Column The security column displays the security settings for the current user. If this user is restricted from accessing a computer, a closed padlock symbol is displayed. If the user is allowed to access the computer, the cell is empty. Note: The KVM administrator can prevent computers from appearing in the Main View if the user doesn't have rights to access them (for additional information, see the Options page, on page 29). Console Column The console currently viewing the computer is indicated in this column by its corresponding letter (A­D). If multiple consoles are focused on the same computer, an asterisk will appear in the console cell. AutoScan Button Click the AutoScan button or press "ALT + A" on the keyboard to toggle the AutoScan feature. Setup Button Click the "Setup" button or press "ALT + S" on the keyboard to access the IntelliView Setup pages. If the user is not logged in as Admin, the Setup button will not be selectable (grayed-out). Logout Button Click on the "Logout" button or press "ALT + T" on the keyboard to return to guest-level access. If the administrator has removed guest access, then when the user logs out, they lose focus on the port. [. . . ] Select Mode: The mode of operation a daisy-chained KVM switch, in Static Mode, enters when the first front-panel button is pressed. Select Mode allows the user to select BANKs, hosts, etc. with the next button press. 42 GLOSSARY Standalone: A single KVM switch that operates independently (not connected to others). Static Mode: The predominant mode of operation of the KVM switch. [. . . ]