User manual BELKIN F5D6230-3CE4

[. . . ] Using the Web-Based Advanced User Interface . 43 Configuring the Wireless Network Settings . 111 Warning for users of a Non-Flat Rate ADSL . 114 Belkin Router Internet Service Provider (ISP) Reference Guide . [. . . ] 5. 6 7 8 9 10 59 Using the Web-Based Advanced User Interface Setting up WPA for Wireless Desktop and Wireless Notebook Cards that are NOT Manufactured by Belkin If you do NOT have a Belkin WPA Wireless Desktop or Wireless Notebook Card, and it is not equipped with WPA-enabled software, a file from Microsoft called "Windows XP Support Patch for Wireless Protected Access" is available for free download. Please Note: The file that Microsoft has made available works only with Windows XP. Other operating systems are not supported at this time. Important: You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems: · Windows XP Professional · Windows XP Home Edition 60 Using the Web-Based Advanced User Interface 1 2 3 4 5 section Setting up Windows XP Wireless Network Utility to use WPA-PSK In order to use WPA-PSK, ensure you are using the Windows Wireless Network Utility by doing the following: 1. 3. Under Windows XP, click "Start > Control Panel > Network Connections". Right-click on "Wireless Network Connection Properties", and select "Properties". Clicking on the "Wireless Networks" tab will display the following screen. Ensure the "Use Windows to configure my wireless network settings" box is checked. 6 7 8 9 10 61 Using the Web-Based Advanced User Interface 4. Under the "Wireless Networks" tab, click the "Configure" button and you will see the following screen. 5. For a home or small business user, select "WPA-PSK" under "Network Authentication". Note: Select "WPA" if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 6. 7. Select "TKIP" or "AES" under "Data Encryption". This setting will have to be identical to the Router that you set up. Each inbound port entry has two fields with five characters maximum per field that allows a start and end port range, e. g. For each entry, you can enter a single port value by filling in the two fields with the same value (e. g. [7500]-[7500]) or a wide range of ports (e. g. If you need multiple single port values or a combination of ranges and a single value, you must use multiple entries up to the maximum of 20 entries (e. g. You can only pass one port per internal IP address. Opening ports in your firewall can pose a security risk. You can enable and disable settings very quickly. It is recommended that you disable the settings when you are not using a specific application. 65 Using the Web-Based Advanced User Interface Setting Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. To restrict Internet access to a single computer, for example, enter the IP address of the computer you wish to restrict access to in the IP fields (1). Next, enter "80" in both the port fields (2). You can also select "Always" to block access all of the time. [. . . ] However these features cannot always be totally relied upon. Therefore it is imperative to read the following information to avoid unwanted service charge costs. It is important to know that not all requests to reconnect are made by the users themselves. A request to reconnect can be given by Internet Explorer or any other Internet Browser, Email clients such as Outlook Express and automatic update programs like Windows update and Antivirus programs. [. . . ]