User manual BELKIN F5U098

[. . . ] Insert the PCI Card into a PCI slot that supports bus-master DMA. (Your computer's manual should identify the bus-master slots. ) Connect your hard drive(s) to the controller card at this time. Close the case and plug in the power cord. Restart your computer and insert the installation CD into your CD-ROM drive. [. . . ] Choose "SIL PCI-0680 ATA/133 Controller" and click "OK". Verifying Proper Installation in Windows NT Double-click the "My Computer" icon, select "Control Panel", then click on the "SCSI Adapters" icon. Select the "Device" and "Driver" tabs. If the PCI Card is correctly installed, you will see a listing for "Silicon Image SIL0680 Ultra-133 Medley ATA Raid Controller". Windows 2000 Driver Installation 1. Make sure your computer is completely powered down by powering off the PC and unplugging the power cord. Insert the PCI Card into a PCI slot that supports bus-master DMA. (Your computer's manual should identify the bus-master slots. ) Connect your hard drive(s) to the controller card at this time. Restart your computer and insert the installation CD into your CD-ROM drive. The PCI Card on-board BIOS will automatically detect the drives connected to it once power-up is complete. When your Windows operating system has finished loading, the PCI Card will be detected and the "New Hardware Wizard" will detect "PCI Raid Controller". Select "Search for a suitable driver for my device (Recommended)". Click the box next to the "CD-ROM" drive option. Your Windows operating system will locate the driver for "Silicon Image SIL0680 Ultra Medley ATA Raid Controller". If the "Digital Signature not Found" dialog box appears, select "Yes" to continue. Click "Finish" to complete the installation. Restart your computer. 7 INSTALLATION (CONTINUED) 12. A detailed electronic manual can be found on the PCI Card installation CD. This manual includes all the information necessary to set up and maintain your Raid array. Verifying Proper Installation in Windows 2000 1. Right-click the "My Computer" icon, then select "Properties". Select the "Hardware" tab, then select "Device Manager". Click on the "+" sign next to the "SCSI and Raid Controller" entry. In the drop-down list you should see an entry for "Silicon Image SIL0680 Ultra-133 Medley ATA Raid Controller". Windows XP Driver Installation 1. Make sure your computer is completely powered down by powering off the PC and unplugging the power cord. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Declaration of Conformity We, Belkin Components, declare under our sole responsibility that the F5U098, to which this declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1 1992. Belkin Components Limited Lifetime Product Warranty Belkin Components warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. [. . . ]