User manual BELKIN F5U099

[. . . ] P74065-F5U099-man_6-02. qxd 6/24/02 5:06 PM Page a Belkin Floppy Drive Kit User Manual P74065 F5U099 P74065-F5U099-man_6-02. qxd 6/24/02 5:06 PM Page b P74065-F5U099-man_6-02. qxd 6/24/02 5:06 PM Page c TABLE OF CONTENTS Introduction . Configuring the Floppy Disk Drive Troubleshooting . [. . . ] If your computer has an available 3. 5-inch drive bay, insert the floppy disk drive directly into the drive bay, and secure the drive using the six mounting screws provided. If you need to mount the floppy drive into a 5. 25-inch drive bay, mount the floppy drive into the 5. 25-inch drive bay adapter as shown in Fig. Connect the power cable as shown in Fig. 1. 4 P74065-F5U099-man_6-02. qxd 6/24/02 5:06 PM Page 5 CONFIGURING THE FLOPPY DISK DRIVE Your floppy disk drive can be configured as either "drive A" or "drive B" depending on how the floppy interface cable is connected. To configure as drive A, connect your floppy drive to connector (A). To configure as drive B, connect your floppy drive to connector (B). 2 5 P74065-F5U099-man_6-02. qxd 6/24/02 5:06 PM Page 6 TROUBLESHOOTING Drive activity LED does not light when attempting a read or write data. Make sure that the interface cable and power cables are properly connected. Drive activity LED lights as soon as power is applied to computer, and stays lit. The ribbon cable may be reversed. Check orientation of Pin# 1. Invalid media or "Track 00 bad" message when attempting to format media. Make sure you format your floppy disk media to the correct capacity. A high-density diskette (HD) requires a 1. 44MB format, a double-density (DD) diskette requires a 720k format. Your drive may not be properly configured in CMOS. Confirm that the floppy drive is correctly configured in your computer's CMOS settings. 6 P74065-F5U099-man_6-02. qxd 6/24/02 5:06 PM Page 7 INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F5U099 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Declaration of Conformity We, Belkin Components, declare under our sole responsibility that the F5U099, to which this declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1 1992. Belkin Components Limited Lifetime Product Warranty Belkin Components warrants this product against defects in materials and workmanship for its lifetime. [. . . ] 2263 310. 604. 2089 (fax) techsupp@belkin. com 00 800 223 55 460 eurosupport@belkin. com Australia: 1800 666 040 Europe: Belkin Components 501 West Walnut Street Compton · CA · 90220 · USA Tel: 310. 898. 1100 Fax: 310. 898. 1111 Belkin Components, Ltd. Express Business Park Shipton Way · Rushden · NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B. V. Starparc Building · Boeing Avenue 333 1119 PH Schiphol-Rijk · The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components Ltd. 7 Bowen Crescent · West Gosford NSW 2250 · Australia Tel: +61 (2) 4372 8600 Fax: +61 (2) 4325 4277 © 2002 Belkin Components. All trade names are registered trademarks of respective manufacturers listed. P74065 [. . . ]