User manual BELKIN F6C800-UNV

[. . . ] INTRODUCTION Thank you for purchasing a Belkin Uninterruptible Power Supply (UPS). Each year, several natural and man made occurrences put the power supplied to your electronics in your home or office in jeopardy. At risk are your hardware, software and data because of these power problems. IMPORTANT SAFETY INSTRUCTIONS Please save this manual! [. . . ] Make sure that the telephone line from the wall is plugged into the connector marked "IN", and the device to be protected is plugged into the connect or marked " OUT". Serial or USB Communication Port (Installation Optional) To fully utilize the Bulldog Shutdown Software; you will need to connect the UPS to your computer. The communication port will provide the following features: 1. Monitoring battery status and condition 4. Use the ON/OFF/TEST UPS power switch function to schedule 6. UPS for power saving You may connect the UPS to your computer by choosing either the Serial or USB ports. Do not connect your computer through both ports. SITE WIRING FAULT (ON REAR PANEL) _ Solid Red 1. 2. RS-232 Connector From the "Welcome to the Belkin Bulldog Plus Product Installation Browser" window, locate and choose User Manual's. The " Bulldog Plus User Manuals" window will appear. Please move your pointer to the manual you wish to open and click. To save a copy to your hard drive, you will need to goto "File" on your menu bar and choose "Save a copy". On the Save a Copy window, please choose a destination folder for the manual. 3. 4. USB Connector I) Uni nstal l for Wind ows 9 5/98/ Me/NT 4/200 0/XP The re ar e two options t o uninstall the Belkin Shutdo wn So ftwar e. Click th e Sta rt icon in the lower left hand corn er of your scre en an d got o the Prog rams folde r. Scroll to th e Belkin Bulldo g Plu s folder and ch oose set up. The Prog ram Files and Audio Files will be checke d. Click Finish when complete. Using the serial or USB cable (provided), connect the cable to your UPS then connect the other end to the USB port on your computer. Caution: Use only the factory-supplied UPS monitoring cable. When the USB cable is first connected to a USB port on your computer, the Windows® 98 dialog called ADD NEW HARDWARE WIZARD should automatically appear. (To display this dialog manually, click the START button and choose SETTING to access the control panel, and double-click on ADD NEW HARDWARE. ) 2. The ADD NEW HARDWARE WIZARD will guide you through the installation process. A dialog states, "Windows will now search for any new Plugand-Play devices on your system. " Click Next. A subsequent dialog gives you these options: "Search for the best driver for your device (recommended) and display a list of all drivers in specific location. [. . . ] Recycling Information Your UPS contains a Non-spillable Sealed Lead Battery. On the battery, you will find the battery name. Please reference the chart below for recycling information. Battery Name BB Battery CSB Battery VISION Battery Recycling Inside the USA (800) 278-8599 (800) 738-7372 (973) 726-5323 Recycling Outside the USA N/A 1 (817) 244-4415 N/A 9. Belkin Components User License Agreement Away from sunlight Away from heat Away from water Belkin Components (Belkin") thanks you for choosing one of our products. [. . . ]