User manual BELKIN F8E201

[. . . ] P73096-F8E201-US-man-qxd 3/9/00 8:14 AM Page 1 ClassicMouse User Manual P73096 F8E201 F8E201-BLK P73096-F8E201-US-man-qxd 3/9/00 8:14 AM Page 2 P73096-F8E201-US-man-qxd 3/9/00 8:14 AM Page 1 1. Introduction ABOUT YOUR MOUSE 1. 1 An Introduction to Your New Belkin ClassicMouse The Belkin ClassicMouse is a high-resolution three-button mouse designed for today's active PC user. It works with Microsoft® systems for optimum compatibility, and its sleek design helps reduce stress and undue hand and wrist fatigue. It features dynamic resolution, low-friction rollers and three separate function micro-switch buttons for years of productive use. [. . . ] To remove the driver you have selected, use your "Tab" key until the "Remove" tab is selected. Use your "Arrow" keys to select any other drivers and repeat the process until all but one driver remains. Even if it is the wrong driver you can use it and change it to the mouse driver you want. After removing or changing the mouse driver, use your "Tab" key until "Close" is selected and then press "Enter". Then you will have to reboot your computer. Use your "Windows®" key at the bottom left hand corner of your keyboard if you have one; if not, press "Alt + S". Then use the "Up" arrow to select "Shut Down" and press "Enter". Use your "Arrow" key to select "Restart" and press "Enter". Q: After installing the mouse driver and rebooting, my mouse will not work. How do I change the mouse driver without mouse control? 6 P73096-F8E201-US-man-qxd 3/9/00 8:14 AM Page 7 3. Troubleshooting A: (continued) Use your "Windows®" key at the bottom left hand corner of your keyboard if you have one; if not press "Alt + S" to go to the "Start" button in Windows® 98. Then use your "Up" arrow to select "Settings" then use your "Right" arrow to select "Control Panel" and then press "Enter". These steps have taken you to the "Control Panel" where you can gain access to your "Device Manager". The "Device Manager" shows your driver status and information and it will allow you to modify their settings. After entering the "Control Panel" use the "Up" and "Down" arrows to select "System" and then press "Enter". After entering "System Properties" use the "Right" arrow to select "Device Manager". Then press "Tab" to bring your selection to "Computer" and then use the "Down" arrow until your "Mouse" is highlighted. Then use your "Right" arrow to expand and select your mouse driver or drivers. After you select the mouse driver, use your "Tab" key to select "Properties" and then press "Enter". Use your "Right" arrow key to choose the "Driver" tab and then use your "Tab" key to choose "Update driver" and then press "Enter". The next options will vary from computer to computer because there are many types of Windows® operating systems. The wording or options will be a little different but should be somewhat the same. [. . . ] The slower the setting, the slower you can double click for your mouse to respond. To see which speed is best for you, try double clicking within the "Test" box. If you double click and it does not change color, you might want to change the speed to a lower setting. "Mouse Speed" determines how quickly your pointer moves across the screen. [. . . ]