User manual BELKIN F8E815

[. . . ] Upon completion of installation, you will be prompted to restart your computer. You must restart at this time for the software to function. En Keyboard Using your mouse, right-click on the keyboard icon in your system tray located at the bottom right of your screen. The dialog box allows you to hide the keyboard icon, set your OSD (on-screen display) time-out, and provides "About" for the software. [. . . ] Within five seconds, push the reset buttons on the mouse and on the keyboard. Remove batteries and replace with a fresh set. En A self-cleaning ball cage helps prevent dust and lint from building up around the ball. However, if the pointer should skip or move abnormally on the screen, we recommend you clean your mouse manually. Wipe the ball with a clean lint-free cloth. Blow into the ball cage to dislodge any dust and lint. If there is build-up on the rubber rollers inside the ball cage, clean using a cotton swab with isopropyl alcohol (applied sparingly to the swab) to remove any debris. Use a damp rag to clean the outer surface of your mouse (do not use any harsh cleaning agents such as cleanser or alcohol). You will be asked if you are sure if you want to remove selected application and all of its components. Follow the on-screen instructions to complete the process. We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F8E815spBNDL to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. We, Belkin Corporation, declare under our sole responsibility, that the F8E815spBNDL to which this declaration relates, is in conformity with EN55022, EN61000-3-2, EN61000-3-3, and EN55024. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8inches) during normal operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Components may void the users authority to operate the equipment. [. . . ] If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. bELKIN IS NOT RESPONSIBLE FOR SPECIAL , INCIDENTAL , OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY , OR UNDER ANY OTHER LEGAL THEORY , INCLUDING BUT NOT LIMITED TO , LOST PROFITS , DOWNTIME , GOODWILL , DAMAGE TO OR REPROGRAMMING , OR REPRODUCING ANY PROGRAM OR DATA STORED IN , OR USED WITH , BELKIN PRODUCTS. [. . . ]