User manual BELKIN F8E832-BNDL

[. . . ] Connect the receiver to your computer's PS/2 port. The receiver has a 2-head connector for the Keyboard and Mouse connections (purple is for the Keyboard and the USB connection; the green is for the Mouse). There is also an illustration on the top connector to identify them. If your computer does not use the same color scheme, match the plug with the illustration next to the port. [. . . ] Upon completion of installation, you will be prompted to restart your computer. You must restart at this time in order for the software to function. 5 USB-PS/2 STANDARD KEYBOARD HOT KEY FUNCTIONS My Documents My Picture Launch Microsoft My Document. Launch Microsoft My Picture (Note: This function does not work in Windows 98. ) Launch Microsoft My Music (Note: This function does not work in Windows 98 or 2000. ) Start and stop the playback of your audio and video applications. Open your system's default e-mail application. Open your system's default Internet browser. 6 My Music Play/Pause Stop Volume Down Volume Mute Volume Up Previous Track Next Track My Favorite Refresh Mail WWW TROUBLESHOOTING The Keyboard and/or Mouse is/are not detected or do not work after installation. · Make sure the receiver cables are plugged into either the computer's PS/2 port or a USB port. If you are connecting via PS/2, make sure that both plugs are being used (purple keyboard connection and the USB connection with the green PS/2 adapter). If you are connecting it via USB, be sure to connect the USB side only. · For optimal performance, place the receiver at least eight inches (20cm) away from the computer monitor, the computer, any external storage devices, or other electrical devices. · Make sure you have properly installed the batteries. Test the batteries to make sure they are not dead (you can do this by installing them into another device). · You may have other system devices that are conflicting with the Mouse and/or the Keyboard. Check the IRQ/address setting of these devices for conflicts and change the settings as required. Please refer to your computer documentation or the manufacturer's technical support for assistance in making these changes. 7 TROUBLESHOOTING · Make sure you have properly established communication/ synchronization between the receiver and the Mouse and Keyboard. · If the Keyboard and/or Mouse are not working, make sure that the LED on the Keyboard and/or Mouse start flashing when you push any of the Keyboard keys, Mouse buttons, or move the Mouse. If the LED does not flash, check to make sure you have installed the batteries correctly. · When the Keyboard or Mouse LEDs are flashing, the LED on the receiver should also flash to indicate they are speaking to each other. If the LED on the receiver does not flash, it means that the devices have not connected properly. Push the reset buttons on the Mouse and on the Keyboard. · If your Mouse pointer becomes choppy on-screen or the Keyboard does not register keystrokes, replace batteries swith a fresh set. 8 UNINSTALLATION PROCESS FOR WINDOWS 98, ME, 2000, AND XP 1. Select "Belkin Wireless Driver, " then click on "Add Remove". You will be asked if you are sure if you want to remove the selected application and all of its components. [. . . ] This Class B digital complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. Europe-European Union Notice Radio products with the CE 0560 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). · EN 60950 (IEC60950) ­ Product Safety · EN 300 328 Technical requirement for radio equipment · ETS 300 826 General EMC requirements for radio equipment. [. . . ]