User manual BELKIN F8E888

[. . . ] So enjoy, and thank you for choosing Belkin! 1 P73356-F8E888-Aerocrsr-man. qxd 1/14/01 2:10 PM Page 2 Hardware Installation 2. 1 Hardware Installation Your mouse connects to either a PS/2 mouse port or a Universal Serial Bus (USV) port . To check, look at the back of your computer for the port that is designated for your mouse. Some PCs will have the word MOUSE marked next to the PS/2 connector. If you are still unsure, please refer to your hardware manual. [. . . ] (See problem #2 bellow) Problem #2 Q: If I have more than one mouse driver, how do I remove the driver without the mouse control?How do I boot into normal Windows® mode?A: Use your [Windows® Key] at the bottom left hand corner of your keyboard if you have one, if not, press [Alt] + [S] to go to the Start button. Then use your [Up Arrow] to select "Settings", then use your [Right Arrow] to select "Control Panel" and then press [Enter]. These steps have taken you to the "Control Panel" where you can gain access to your "Device Manager". The Device Manager shows your driver status and information and it will allow you to modify their settings. 4 P73356-F8E888-Aerocrsr-man. qxd 1/14/01 2:10 PM Page 5 Troubleshooting (continued) After entering the, "Control Panel", use your [Up and Down Arrows] to select "System" and then press [Enter]. After entering "System Properties" use your [Right Arrow] to select "Device Manager". Then press [Tab] to bring your selection to "Computer" and then use your [Down Arrow] until your "Mouse" is highlighted. Then use your [Right Arrow], [Right Arrow] to expand and select your mouse driver or drivers. After you have chosen your mouse driver you can now modify it by removing the driver or changing the driver. To remove the driver you have selected, use your [Tab] key until the "Remove" tab is selected. Then press [Enter], [Enter], this will remove the driver. Use your [Arrow Keys] to select any other drivers and repeat the process until all but one driver remains. Even if it is the wrong driver you can use it and change it to the mouse driver you want. After removing or changing the mouse driver, use your [Tab] key until "Close" is selected and then press [Enter]. Use your [Windows® Key] at the bottom left hand corner of your keyboard, if you have one, if not, press {[Alt] + [S]}. Then use your [Up Arrow] to select "Shut Down" and use your [Enter] key. Use your [Arrow Key] to select "Restart" and press [Enter]. Problem #3 Q: After installing the mouse driver and rebooting, my mouse will not work. How do I change the mouse driver without mouse control?5 P73356-F8E888-Aerocrsr-man. qxd 1/14/01 2:10 PM Page 6 Troubleshooting (continued) Problem #4 Q: Why does my external mouse not work with my laptop computer? [. . . ] To revert your settings as they were before you opened the Mouse Properties window, select Cancel. Software Uninstall 5. Software Uninstall Windows® 95 and Higher a. Click on Uninstall AeroCruiser 1. 0 10 P73356-F8E888-Aerocrsr-man. qxd 1/14/01 2:10 PM Page 11 Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F8E888 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Declaration of Conformity We, Belkin Components, declare under our sole responsibility that the F8E888, to which this declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1 1992. Belkin Components Limited Lifetime Product Warranty Belkin Components warrants this product against defects in materials and workmanship for its lifetime. [. . . ]