User manual BELKIN F8R0500

[. . . ] 3) Your Visor handheld has at least 10KB of free memory. Follow these instructions to install SnapNType software on your Visor handheld 1) Insert the SnapNType floppy disk into your computer's floppy drive. 2) Open the "My Computer" icon on the Windows® desktop and double-click the "3. 5" Floppy" icon. [. . . ] There are four different functions assigned to each button; you can activate different functions by 1) Pressing and releasing the button. 2) Pressing the key and then the button. The following table lists the default functions associated with each button. 7 P73992-F8R0500-man. QXD 5/23/02 1:33 PM Page 8 Using Your SnapNType (continued) The Faceboard Button Pressing the "Faceboard" button will pop up a window containing various less frequently used symbols and punctuation marks. There are also popular "smiley" patterns for your e-mails. Simply touch the on-screen buttons or the corresponding key on your SnapNType keyboard to select the symbol you want to enter. 8 P73992-F8R0500-man. QXD 5/23/02 1:33 PM Page 9 Configuring the SnapNType Software You can customize various features of the SnapNType program to best suit your application. To start the SnapNType configuration program, tap the "SnapNType" icon on your Visor handheld. General Configuration Enable--this will allow the SnapNType to accept key input. Disable--this will turn off the SnapNType. Repeat Rate--this will determine the repeat frequency of a key when you hold it down continuously. Delay Until Repeat--this will determine the delay from your holding down a key to the key repeating. Click Sound--you can enable or disable "key click". For this function to work properly, you need to first turn on "System Sound" in your Visor handheld. Please consult your Visor manual on how to turn on "System Sound". Test Area--you can test your SnapNType by typing in this area. 9 P73992-F8R0500-man. QXD 5/23/02 1:33 PM Page 10 Configuring the SnapNType Software (continued) Programmable Buttons You can program the four application buttons to launch your favorite applications or emulate different soft buttons. After launching the SnapNType configuration program, press and then to start the menu options. Tap on "Preferences" and the following screen will appear: You can program the application launcher from the right side of your "Preference" screen. 10 P73992-F8R0500-man. QXD 5/23/02 1:33 PM Page 11 Configuring the SnapNType Software (continued) You can program the soft-key emulation setting from the left side of your "Preference" screen. 11 P73992-F8R0500-man. QXD 5/23/02 1:33 PM Page 12 Frequently Asked Questions (FAQs) Do I need to disable the SnapNType driver before performing HotSync functions?If you are using a USB cradle, there is no need to disable the SnapNType driver before performing HotSync functions. However, if you use a serial cradle, because both the SnapNType keyboard and your cradle used the same serial port, you will need to disable the SnapNType driver before performing a HotSync function. [. . . ] No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations of exclusions may not apply to you. [. . . ]