User manual BELKIN F8T013

[. . . ] Access the Bluetooth Configuration Panel--right-click the Bluetooth icon, and then select "Advanced Configuration". Access the Quick Connect option--right-click the Bluetooth icon, select "Quick Connect", and then select the type of service to which you wish to connect. ACCESS MY BLUETOOTH PLACES My Bluetooth Places is part of Microsoft® Internet Explorer. There are multiple ways to access My Bluetooth Places: ?? [. . . ] To delete a printer, click "Start > Settings > Printers", right-click the printer to be deleted, and then select "Delete" from the shortcut menu. BLUETOOTH SERVICES Common Configuration Settings These properties can be set individually for each Bluetooth service: ??Service Name --the default name of each service can be changed. Secure Connection--requires that remote devices provide proof of identity and that all data be encrypted. Startup Automatically--starts the service automatically when Bluetooth is started. Notifications--provides visual and/or audio notification that a remote device is attempting to connect (or has connected) to a service on this computer. Notifications Overview There are three types of notification: ??Authentication request, also called a PIN code request--this notification appears automatically in a balloon over the Windows system tray if a Personal Identification Code is required before a connection can proceed. An audio file can also be associated with the notification. Authorization request, also called a connection request--this type of notification can be visual, audio, or both. It notifies you of attempts to access a Bluetooth service on this computer; the connection will not proceed until you click the balloon that appears over the Windows system tray. The Bluetooth radio on both this computer and the remote device must support audio. The remote device handles both audio input and output for this computer; therefore, this computer does not require a sound card, microphone, or speakers. Configure the Audio Gateway Service From the Windows system tray, right-click the Bluetooth icon, select "Advanced Configuration > Local Services", and then double-click the "Audio Gateway" service. Set the common configuration properties of the service, and then click "OK". Bluetooth Serial Port The Bluetooth Serial Port service allows a remote Bluetooth device to establish a wireless serial connection with this computer. The wireless serial connection may be used by applications as though a physical serial cable connected the devices. To establish a Bluetooth Serial Port connection The connection must be initiated from the remote device by the Bluetooth Serial Port application. Determine the communications port being used by this computer for the Bluetooth Serial Port In the Windows system tray, right-click the Bluetooth icon, select "Advanced Configuration", and then the Local Services tab. The COM port assigned to this service is the last item in the Bluetooth Serial Port service row. Configure the application on this computer that will use this service to send its data to this COM. Add a Bluetooth Serial Port The Bluetooth Serial Port service has one pre-configured Bluetooth Serial Port, but additional Bluetooth Serial Ports can be added as needed. [. . . ] The eighth entry contains the Link Manager Protocol sub-version number information, if appropriate. FIND INFORMATION ABOUT THE BLUETOOTH HARDWARE ATTACHED TO MY COMPUTER In the Bluetooth Configuration Panel, select the Hardware tab. INTERNET CONNECTION SHARING DOES NOT WORK This occurs because Internet Connection Sharing was enabled when Bluetooth was installed (this is a Microsoft Windows behavior and is considered proper operation). To resolve the "problem": Disable Sharing for the Ethernet adapter: Windows Control Panel > Network and Dial-Up Connections Right-click "Local Area Connection", select "Properties", and then select the Sharing tab. [. . . ]