User manual BELKIN F8T020

[. . . ] BLUETOOTH PDA ADAPTER CARD USER MANUAL F8T020 2 TABLE OF CONTENTS Introduction . . 63 3 INTRODUCTION Bluetooth PDA Adapter Card Thank you for purchasing the Bluetooth PDA Adapter Card (the Adapter Card) featuring wireless technology from Belkin. Now you can connect your PDA to peripherals and other computing devices from up to 10 meters away without cables. Establish ad-hoc connections between devices in your home, office, or while on the road. [. . . ] Initiate ActiveSync via the Bluetooth Radio icon located at the bottom of the "Today" screen (see Fig. Follow the on-screen instructions. Fig. 32--ActiveSync Partner 37 DEVICE DISCOVERY (CONT'D) Create bond with this device: Found only in the "Actions" menu; allows you to establish a bond with another device to allow uninterrupted exchange of data. Tap on the device that you want to bond with to display the "Device Information" dialog. Select "Create bond with this device" from the "Actions" menu. A screen will appear asking you to enter a PIN code (See Fig. Enter the PIN code that you and the owner of the selected device have agreed to. Tap "OK. " The owner of the selected device will be prompted to enter the same PIN code. A status screen will appear indicating the success of the bond. Fig. 33--Pincode Requested 38 DEVICE DISCOVERY (CONT'D) Remove bond with device: Found only in the "Actions" menu; allows you to remove a bond. Tap on the device that you want to remove the bond from to display the "Device Information" dialog. Select "Remove bond with device" from the "Actions" menu. Remove this device: Allows you to remove a device from your database of discovered devices. Tap on the device that you want to remove to display the "Device Information" dialog. Select "Remove this device" from the "Actions" menu. A warning dialog prompts you to confirm your action. The selected device no longer exists in any of your groups. 39 DEVICE DISCOVERY (CONT'D) Moving and Removing Devices You can move a device between groups or remove a device from any group except "All Devices". You can only remove a device from "All Devices" by removing the device from your database. Tap on the device to display the "Device Information" window. Tap the "Show Device Groups" button to display the "Device Groups" screen. Check those groups where you want the device to appear and uncheck those where you do not. 40 DEVICE GROUPS Working with Device Groups Three empty device groups named "All Devices", "Home", and "Work" are provided when you install the Bluetooth software. All discovered Bluetooth devices are stored in the "All Devices" group when saved. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, 60 FCC/CE STATEMENT it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the distance between the equipment and the receiver. [. . . ]