User manual BELKIN F8V7097

[. . . ] However, the collar will not be necessary in most cars (and will not fit in the power outlet). 3. Bend and position the flexible-steel neck to a desired position for your iPod mini. Carefully slide your iPod mini into the form-fitted cradle at the top of the TuneBase FM. The iPod mini will power on if the car battery is on. [. . . ] Please use the gooseneck and the articulation behind the docking cradle to position it away from any controls of the car. Please make sure to position the gooseneck in as close to an upright position from the CLA as possible (Fig. A). Troubleshooting The Tunebase rotates out of position around the center of the power outlet. Solution 1 Please make sure to solidly attach the cigarette lighter adapter portion of the product in the power outlet. Test the stability by pushing the product sideways before driving. Solution 2 In some cars, the power outlet is bigger in diameter than the cigarette lighter adapter. You will notice a wiggle in the TuneBase when pushing it. In that case, please use the collar provided to decrease any play. Fit the collar around the cigarette lighter adapter of the TuneBase first and then attach the cigarette lighter adapter in the power outlet. Slide the collar into the power outlet making sure that all four protrusions fit into the power outlet. Solution 3 Some power outlets will not fit all four protrusions of the collar. In order to improve the fit of the cigarette lighter adapter in the power outlet of the car the collar can be cut to size. In order to do so please cut as many protrusions as necessary with scissors. Cut one by one always trying the fit again in the power outlet after each cut. Cut the protrusions from one side to the other, not the opposites (Fig. C). Test fit in power outlet after each cut! The TuneBase connects firmly to the power outlet of my car but the TuneBase still rotates. Solution Please see if the power outlet of your car rotates in its socket. If so, please consult your car manufacturer. Troubleshooting The rubber friction washer is out of position and I cannot insert the cigarette lighter adapter into the car's power outlet. Solution Please use a clean and empty table for disassembly. Please use pliers to loosen the nut at the end of the cigarette lighter adapter slightly. It is not necessary to unscrew the entire nut. Move the friction washer back into centered position. [. . . ] BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING, ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusion of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. Belkin Corporation 501 West Walnut Street Compton, CA, 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B. V. [. . . ]