Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BELKIN FG1033-12. We hope that this BELKIN FG1033-12 user guide will be useful to you.
Lastmanuals help download the user guide BELKIN FG1033-12.
Detailed instructions for use are in the User's Guide.
[. . . ] The Master Switch can also be used as a master on/off controller for all the connected devices.
1
INSTALLATION OF THE PUREAV ISOLATOR
1) Turn OFF all of your electronic equipment and ensure that the PureAV is also switched OFF. 2) Plug your electronic devices into the PureAV's AC outlets. Note: DO NOT USE two-wire extension cords or adapters with this product. Using any extension cord in conjunction with the Belkin PureAV will void all Belkin Components warranties. [. . . ] Please contact Belkin Components for a free surge protector replacement. Line OK (Green): This light should also come on when the power switch is turned on. It shows that 120V AC power is present with no wiring faults and it is safe to plug and use connected equipment. Line Fault (Red): If on, this light indicates that a wiring fault has been detected. This may be the result of a lack of grounding or reversed phases, among other problems. A qualified electrician should be notified so that the problem can be corrected before plugging in devices. Master (Amber): This on/off switch provides a built-in, automatic shutdown, 15-Amp circuit breaker. The light should come on when the unit is plugged into a 120V AC/60Hz outlet and switched to the "ON" position. Important: If the current draw exceeds 15 Amps for an elongated period of time, the circuit breaker will shut down surge protector power to prevent damage. Allow a brief time for the PureAV to cool before resetting the circuit breaker switch. (To reset, simply press the switch. ) Power Filter Technology (PFT): As mentioned earlier, this design prevents devices that are plugged into a given receptacle bank from transferring contamination to a device plugged into another receptacle bank. Each pair of receptacle banks is isolated from the other pairs within the PureAV. (The 10-outlet PureAV has five pairs of PFT receptacle banks. ) The PureAV Isolator provides increasing levels of protection and filtration from surges, spikes, lightning strikes, and EMI/RFI. When AC power travels from the wall outlet and throughout each successive pair of receptacle banks, each power filter or "graduating filtration" level increases the isolation, filtration, and
3
FEATURES
protection for your most sensitive devices. The higher receptacle banks or "LEVELS 2, 3, 4, 5" will provide a greater amount of surge and line-noise protection than the first receptacle bank or "LEVEL 1". Note: LEVEL 1 is capable of protecting any sensitive electronic device, but you may wish to use it for smaller, lower-draw appliances. Simply choose what devices you desire to use and plug into the protection you need. Cord Management: The power cord wraps around the surge unit and snaps into the grooves along the sides for clutter-free cord management. Wall Mounting: The PureAV is mountable using a No. Simply measure and align the keyhole slots on the bottom of the unit over the No. (Screws are not included. )
BELKIN CONNECTED EQUIPMENT WARRANTY
Belkin Components warrants to the original purchaser of any Belkin Surge Protector for the life of the product, that the surge protector shall be free of defects in design, assembly, material, or workmanship, and will repair or replace, at its option, any defective product free of charge. Belkin Components will repair or replace, at its option, any equipment that is damaged by a transient voltage surge/spike or lightning strike, (an "Occurrence"), while properly connected through a Belkin Surge Protector to a properly wired AC power line with protective ground. [. . . ] If you are using an AC surge protector only that does not have phone, network, or coaxial protection, the warranty is null and void if a power disturbance damages your equipment through the phone, network, or coaxial lines. You are only covered if the disturbance entered through the AC lines. *Please note: This product is not for use with aquariums and all other water-related products. Use only indoors and in dry locations.
5
BELKIN CONNECTED EQUIPMENT WARRANTY
This warranty contains the sole warranty of Belkin Components, there are no other warranties, expressed or, except as required by law, implied, including the implied warranty or condition of quality, merchantability or fitness for a particular purpose, and such implied warranties, if any, are limited in duration to the term of this warranty. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BELKIN FG1033-12
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BELKIN FG1033-12 will begin.