User manual BELKIN RACKMOUNT RUNTIME CHART1

[. . . ] corporations rate their Internet downtime costs at more than $50, 000 per hour In some data centers, air conditioning consumes 40 percent of the total power. Keeping all of this equipment running smoothly is a daunting technical and logistical task. For a major Internet site, even a tiny glitch in the power causes unacceptable disruption of operating efficiency. An unprotected microprocessor malfunctions if power is interrupted for even a single AC cycle--1/60th of a second. [. . . ] Maximum data integrity and system uptime require a prioritized shutdown plan, which is managed by the bundled power management software. Preserving data is an increasingly complex issue in today's enterprise environments. Communication systems are required to transfer and store information within internal computer networks and must also provide critical links to enterprise-wide networks. Specifically designed for enterprise-wide networks With its advanced features and conveniently accessible design, the Belkin Rackmount UPS provides complete protection for servers, storage, networking, KVM, and other enterprise devices from damaging power fluctuations. The Belkin UPS also allows end users to monitor, control, and shut down servers remotely via Internet Protocol. Ensure data integrity system-wide with the bundled power management software A prioritized shutdown ensures that all network devices are shut down in an orderly, sequential manner, saving all work-in progress throughout the network. The power management software empowers network administrators by allowing them to define their own shutdown process. Thus, a company's most critical equipment (such as a database or file server) can be shut down last, after work-in progress has been saved from client workstations through hubs, switches, routers, and communication servers. 6 Ease of serviceability with hot swappable batteries Features convenient, swappable, front-access batteries While enhanced battery management has the ability to double battery service life, it cannot prevent inevitable battery failure. When your batteries reach the end of their useful life, replacement is easy with hot swappable batteries. Simple access through the front panel allows you to safely install new batteries without ever powering down the connected equipment. 1. 2. 3. 4. 7 True sine wave and line-interactive voltage regulation True sine-wave output True sine-wave output provides assurance of compatibility with all loads. Line interactive Innovative line-interactive design uses the DC to AC power inverter "in reverse. " It acts like a battery charger, providing greater performance and efficiency during normal operation. By cleaning and conditioning utility power with line-interactive voltage regulation, this UPS creates true, sine-wave output to provide safe and continuous power. Additionally, the unit features easy installation and implementation as well as rapid recharging via independent battery charges. High-line (208V) versus low-line (120V)-- What's best for your customer Choosing between voltages is mainly a North American* issue. What might be confusing is that some individuals make references to 120V power, others mention 110V power or even 117V power. The high-line watt column refers to the output power in a 208V environment and low-line watt column refers to a 120V environment. These power ratings are name-plate ratings; actual ratings are typically lower than name-plate ratings and depend upon the server configuration. 9 UPS front-panel configuration Models: F6C110-RKM-2U, F6C150-RKM-2U, F6C230-RKM-2U, and F6C320-RKM-3U 1. LED indicating the battery level up to 100% 7. LED indicating 80% to 99% battery level 8. LED indicating 60% to 79% battery level 9. LED indicating 40% to 59% battery level 10. LED indicating 20% to 39% battery level 11. LED indicating the load level up to 85% 12. LED indicating 67% to 84% load level 13. LED indicating 50% to 66% load level 14. LED indicating 33% to 49% load level 15. [. . . ] LED indicating 17% to 32% load level 11 UPS rear-panel configuration Models: F6C110-RKM-2U, F6C150-RKM-2U, F6C230-RKM-2U 1. Power cord with L5-15 plug (F6C230-RKM-2U: L5-20) 5. Communications port 12 UPS rear-panel configuration Model: F6C320-RKM-3U 1. Communications port 13 UPS rear-panel configuration Models: F6C110-RKM-2U-230V, F6C150-RKM-2U-230V, F6C230-RKM-2U-230V 1. [. . . ]